• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

shifting very slow quota, in the table and in the creation of scketch

  • Thread starter Thread starter MassimoAB123
  • Start date Start date

MassimoAB123

Guest
Hello everyone, I have a problem on the work station I have at work.
for a few days I have been made available a work station with win view to 64 bit, 8 gb ram, quad core processor, graphics card nvidia picture fx 370.
Unfortunately, when I find myself creating scketch, even simple parts, proe wf4 responds with a monstrous slowness in moving quotas, inserting center line etc.
the problem also arises by moving :confused: the quotas during the table. the spline, to create partial sections, is infinitely slow to "close".
Can you help me figure out where the problem might be?
Thank you.
maximum
 
I understand you perfectly! It happens to me the same thing, lately to put on the table a little together I take days (and not hours). I think it depends on the type of simplified representation I still have to experiment. I hope someone more experienced than us solve this "mystery", I didn't at all have already opened a topic on the problem without someone answering me.
 
hi cingolo, the problem persists. today at work they were telling me that the problem could be in the fact that they installed windows seen 64 bit in Italian and the fact that it is in Italian can create some problem (I didn't understand well what could enter the language). Let us see if someone will answer us, however from my observations, I know that as I work the system slows down more and more. no one can understand the nature of the problem.
 
Last edited:
I called my ptc dealer this morning. They told me it's a bug due to the presence of sections in the table and they're working on the resolution.:eek: I own the build m90. we hope they will solve soon!
 
to overcome (add) the problem exists a method of making the table in mechanical autocad while maintaining the parametric connection (i.e. if I change the 3d is automatically updated in autocad)?
 
I don't think it's just a build problem or much less Italian version.
I also think that having installed windows seen 64 bit the drivers for your graphics card are not fully compatible, so check that it is.
made this install the m110.

greetings
 
I noticed something strange, I explain: I entered the control panel of the graphics card and I saw that among the software that recognizes among the installed ones, there is no proengieer. I have been informed on the internet and I have seen that there are no ptc certified drivers for this type of card (fx 370 envy). Could it really be a problem of not full compatibility with proengineer? ? ?
Anyway, I'll tell you about the type of build they installed me and then I'll let you know.
As for the use of autocad mechanica, it seems absurd to have to fold to such a solution, even because if I am not mistaken it requires the license, and some companies do not possess it.
Hi.
Thank you.
 
browsing the internet I also noticed this thing, tomorrow I try to hear, see what comes out:finger:
 
problem related to the presence of sections.
symptoms: slowness during:
creation of quotas
shift of quotas
shift visas
creation of notes
shift of notes
Such operations would require a regeneration of cross-section.

==> set dtl def_xhatch_break_around_text on no

resolution not foreseen in wf4 and perhaps even in wf5
 
Thank you for the information, I will set the command you indicate.
I'll tell you whether or not the situation will improve.
Thank you.
Hi.
 
to me nothing changed, I did not find in the file config the voice
dtl def_xhatch_break_around_text or better there is a similar voice but changing the variable does not change anything.
This problem is creating me not a few problems, I should start days an important project:frown: my dealer is no longer hearing.
 
cingolo said:
to me nothing changed, I did not find in the file config the voice
dtl def_xhatch_break_around_text or better there is a similar voice but changing the variable does not change anything.
This problem is creating me not a few problems, I should start days an important project:frown: my dealer is no longer hearing.
Click to expand...
Then there's another case.
What is your hardware?
 
I don't think there's a solution to the problem, the only thing is to hope for in wildfire 5, did any of you have already tested this version?
in recent times I regret the good old cocreate!:biggrin:
 
hi cingolo, I solved the problem with the build m110. However I did a particular set on the graphics card and the config. on the graphics card I touched any voice that he did refer to opengl. on the config, there is the graphics command, this command you must set it on x_windows 32 (it seems to be written so), also remove any set of some command of the config that refers to the opengl. even if I did not understand the reasons for this incompatibility of the graphics card with the opengl, I had a positive feedback.
Let me know.
Hi.
 
excuse my computer ignorance, how do I set the graphics card?
I would like to try on the m90 version (we hope it works on this build too)
 
Hi, I'm niovo and megari I'm late, but with a view of 32 at the unit I had the same problem with quotas.. Try to right-click on the pro-e icon on the desktop, a curtain opens, go on comptibilita' and pounce on "disabled desktop composition"... odds and sketches have greatly improved speed. . .
:finger:
 

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Total: 1 (members: 0, guests: 1)
Back
Top