simply rep part in the table

[k.j.16]

Bye to all,
forsa is a minc...ata but I would like to know if it is possible to insert in the 2d design of a part (I have already seen that for the aid it works) the model in simplified rappresence since I would like to insert a part in cast iron pre and post machine tools without duplicating the model (or create a family tab).
my despite use wf2 but I would like to know if possibly it is possible with later versions (in order to further push to perform the upgrade).
hello and thank you all in advance

 

[maxopus]

I usually use family tables.
for details derived from fusion, model the finished piece including holes and mechanical processing.
After that I create a family variant (table) in which I suppress the holes and apply the overmetals provided for the areas subject to mechanical processing.
I usually make a table consisting of two sheets, in one insert the main variant (finished piece), in the other the variant of the raw piece (with the suppressed holes and the supermetals).

 

[k.j.16]

Okay, thank you very much, so confirm me as I thought it wasn't feasible. . .
I'm probably gonna work out as you said,
hello and thank you again.

 

[dema]

I only use the family table.
...

Okay, thank you very much, so confirm me as I thought it wasn't feasible... .

he said that he uses the family table not that it is not possible, I just opened a case I created a simply rep of the part where I excluded some holes and some processing.

so you can do it.

 

[k.j.16]

Yes, but then can you put that representation on the table?
and put on the table a view in master rap and one with the simply rap you created?

 

[Parametric_Ozzy]

Simplified representations of part can be created, but cannot be recalled in the table.
while the simplified representations together yes.
is a bug that is present only in the wf2, in the previous versions it was possible as well as later.

greetings....:wink:

 

[maxopus]

ops... he shouted, and you're doing it around here.
instead of using such fringes?

 

[dema]

I'm sorry, but we went to wf4 now and I don't have the two anymore and I assumed it could be done.

 

[Parametric_Ozzy]

ops... he shouted, and you're doing it around here.
instead of using such fringes?

Every now and then I live, you think I'm dead...:smile:
in such a fringe, you can do in different modes, depends everything on what modules you have.
The aax module is spectacular. :wink:

I'm sorry, but we went to wf4 now and I don't have the two anymore and I assumed it could be done.

in pro/e there is never anything discounted, you are always surprised.:wink:

 

[Parametric_Ozzy]

Bye to all,
forsa is a minc...ata but I would like to know if it is possible to insert in the 2d design of a part (I have already seen that for the aid it works) the model in simplified rappresence since I would like to insert a part in cast iron pre and post machine tools without duplicating the model (or create a family tab).
my despite use wf2 but I would like to know if possibly it is possible with later versions (in order to further push to perform the upgrade).
hello and thank you all in advance

ps: Now you can rightly push for upgrade, for this and for countless benefits that wf4 compared to wf2 has.
If you need a quote, beat a hit.:wink:

 

[dema]

Remember that however the passage is unidirectional, once you save the file with the wf4 the previous versions you can no longer open them.

so also your suppliers and customers must switch to the wf

 

[k.j.16]

hello ozzy, thank you very much (as usual! I thought it was a strange thing that could only be done with the assemblies.
thanks also for the offer, for 2 years I push for the upgrade but people do not hear us,
(and the beautiful is that we are in assistance!!!!!!!! I would beat a hit but on someone's head!).
Hello and thank you so much again.

 

[arni1]

Hello everyone!

with a make-up also works with the wf4,
the macro pulls out the menu of the 2001 version, where you could simplify a view of the model.
mapkey sr @mapkey_namesimplify_view;@mapkey_labelrr;#views;\
mapkey(continued) #represent;#pick views;@pause_for_screen_pick;#simplify;

hinges

 

[k.j.16]

mmmh, very interesting this...
But by doing so I can't select a simply rap but only to handle the features not to display or wrong?
or is there the special menu that I couldn't find?
hello and thank you again anyway!

 

[arni1]

Unfortunately it is so!
you can not select a simply rap created in the model.


Hi.
arnold