simulazione video

[Filippo Rossi]

Hello.
I am new to the forum and also as experience with the catwalk.
if someone can help me with this problem: If except for the video result in the first processing, I am not given the opportunity to obtain video simulation in the following processing.
Is something wrong or is the problem somewhere else?
thanks for the attention

thread

 

[Filippo Rossi]

Hello again to all,
If anyone has any indications or suggestions, it would give me a big help.
Thanks again
thread

 

[valerio83]

Good evening.
is it possible to save the result of a simulation in any format that is not .catproduct?
Thank you.

 

[mcbramby]

hi vittorio the program saves the .catproduct, if you load it into the caty you turn it as you want............. .

 

[mcbramby]

Filippo is not clear to me what the problem is............ .
do a workmanship and then save the result (e.g. roughing) , and so far ok ............ .
then do another workmanship and what you can't do to see the workmanship before or to save another video result..... or what

 

[valerio83]

I'll explain.
after I saved the result in .catproduct the cat load, from the possibility to save it for example in .catpart, but in the file there is nothing, of a surface or a solid nothing.

I attach an image
practically what I need is that the result of the video is transformed into a solid or surface so that it can be reused in another processing
I hope I've been more exhaustive:biggrin:
Thank you.

 

[mcbramby]

Monday in the office I give an eye............ .

 

[mcbramby]

Here I am... :

save the result video, (key save in a catproduct) , he will save the catproduct with an associated cgr
, the product you can delete it............ .
create a product of the file you want to fresare (if it is already a product you are in place)
and import the cgr (which you will not be able to save as part) using it as crude in the next processing.

 

[valerio83]

Good morning
Unfortunately I need to save as a part xkè I have to copy the result in a process(so I need a result as solid or surface) without going through the product...

 

[valerio83]

Good morning
Unfortunately I need to save as a part xkè I have to copy the result in a process(so I need a result as solid or surface) without going through the product...

so I have to turn the cgr into a catpart,stp or other.. .

 

[mcbramby]

Okay...
But do you need it as a rough? ?
or do you think you're creating a math to work with? ? ?

 

[valerio83]

I need it as a rough. . .

 

[mcbramby]

the solution I gave you needs if you have to work a piece of 2 parts......... then doing 2 cam programs and 2 separate placements.
do the first processing, save the simulation and use it as raw to start working on the other side ................... or cmq to use the simulation as rough for another processing .
I don't think you can editate it as part (or at least I never tried it) .......... .

 

[mcbramby]

I was writing while you answered......... .

If you use it as a rough then follow my first instructions............. should work.

 

[valerio83]

Thank you very much.

 

[mcbramby]

Let me know if you can...... .

 

[valerio83]

hello to all
I have a problem, in video simulation, catechism, sometimes it shows me the distrust between one operation and another and sometimes not
is there a way for you to always see?
I’ll give you an example(what I’m interested in is having the video simulation of the green dashboardThank you.