sliding doors base

[Spartano]

how do I change the "color" of the sliding door panel, of those that are basic in the program archives? there is the possibility to change the "color" of the frame but not of the door nor much less than that of the glass.
ps: in case you had sliding doors even simple can you pass them?

 

[Tristan]

What version of revit do you use?
http://www.cad3d.it/forum1/threads/10267-porte-scorrevoli-a-scomparsa

 

[Spartano]

What version of revit do you use?
http://www.cad3d.it/forum1/threads/10267-porte-scorrevoli-a-scomparsa

2014, the thing that I don't understand is why it's not editable the door....I can only leave it in grey :frown: there are no parameters of material and I can't even add parameters... .

ps: thank you for the link I had already seen but these are double to me serve single

 

[Tristan]

2014? Then take a look here
http://www.revimodels.com/revit-porte-interne-blocchi-arco-libro-scorrevole-scrigno.html

 

[Tristan]

There are no material parameters and I can't even add parameters... .

How not? open the family and add the material parameter to the panel!

 

[Spartano]

what I thought...but it doesn't make me apply anything...if I select the panel select all the glass and panel and it doesn't make me change anything...and I can't even upload the file here
the file would be "sliding - glass" in the family of doors

 

[Spartano]

you just need to change the extension in .rfa

 

[Tristan]

I revit 2015. Even if you can change it, you won't open it.

 

[Spartano]

I know I'm asking you a lot, but... just take off the tip to see if you can? :

 

[Tristan]

I looked at my 2015 library and in that specific family there is the same problem. Obviously it is a door made with a very old version of revit and over time has become "unspeakable". You should open it with a revit 9 for example and change it from there. We can't do anything unfortunately.

 

[Spartano]

Thank you very much so I do not use another half day in an effort to change it:

 

[nirvana]

should be in previous versions, see if you like

 

[Spartano]

Thank you very much =

 

[Spartano]

a and anyway I wanted to say one thing I saw that even in these in the single doors the material can not be changed, I imagine they are the same of the base archive of revit, I solved taking two types on the site revitcity, that after months of attempts I finally realized how to access it, if to someone needed just to make a whistle and ask =) good work to all