solidworks data

[paolo_rossi]

Hello, friends,
I went from a few days to sw 2009 x64... with the new car with a view.
I was drawing a common pulley and I wanted to make the hole with a key. .
Help! I no longer find the palette functions that was in "project freedom -> solidworks date". in the 32-bit version there is...while I don't find it in the x64.
I turned all the menus but I can't find it.
I wanted to know if others had my own problem... and if anyone knows where it is.

Thank you.

 

[re_solidworks]

the project library folder is the same as 32 and 64 bit? Have you checked yet?

 

[paolo_rossi]

in the project library there are 3 entries instead of 4 as usual.
I don't know where he is.

 

[re_solidworks]

try to go into the file settings options and see the project library paths.
You do it in 32 bits, you write down the paths and bring them back in the 64 bit.
Of course, if it's a new installation you don't have your updated library and you have to bring the files back to the new library.
It's a function you saved in the library, right?

 

[Gabriele SWX]

in 2009 version 64 bit the project library is located in the following path: c:\documents and settings\all users\application data\solidworks\solidworks 2009\design library, see if what you have done is in this folder, otherwise you must copy it here.
Bye.

 

[paolo_rossi]

No.
in the bread task there is the tab "project library"...there is no longer the date solidworks folder, while there are central content, toolbox, and solidworks content.
in solidworks date cerano the old feature palette that were under tools -> palette functions.
there are comfy functions already made.
My installation is probably not good.
Can't I insert the path manually?

 

[paolo_rossi]

Hello, gabriele,
I didn't read your post.
I saw and looked for something like that about the hd.
I found c:/users/paolo/application data/solidworks 2009/. . .
There's nothing in the folder.
and if I copied what's in the 32-bit installation here in that folder, would it work?

 

[re_solidworks]

to set the paths by hand (all paths) you have to go to the options -> file locations and select (in this case) project library.

 

[paolo_rossi]

I solved! !
the path where the library is located is:
c:\progamdata\solidworks\solidworks 2009\design library\
I went on options and added the path to file location, project library.
from what you told me you had to find where he had put the library on x64 view.
thanks for the help!:finger:

 

[re_solidworks]

I'm glad you fixed it.

Hi.