solidworks moldova tools exam - mold tools exam certification
MassiVonWeizen
Guest
as I have 2014 (2018 on the office pc) I cannot answer you. but it seems to me that we had already explained how to do it.
edit: I refer to the previous question
edit: I refer to the previous question
MassiVonWeizen
Guest
I know it's not a subject matter, but let me say... What's the point of doing these tests if they're not given the knowledge to overcome it?
I mean that when you carry out a test you do it to verify that you have learned a certain knowledge; who should give this knowledge? who does the tests or who wants from the confirmation test... in the specific case or solidworks through tutorials or someone else through specific courses on a topic (prints and surfaces? ).
It is not that working on solids, cuffing here and there, doing the very advanced tutorials on the plates you learn to osmosis to do everything.
I've been using solids for 15 years, and I think I'm doing it pretty well, yet there are modules and commands that I can't use (stamps, routing...) and if they make me take a test on these topics, they'll be my eyes closed. Of course, if I'm asked to pass it (let's hope not) I'll put my hands on and say that I can't use them and put me in the conditions of learning; I'm joined by a good guy, they give me courses, they give me dispenses, they allow me to go out first to do the course and I pay it... but this knowledge to which anelo must have a logical gestation and not shoot me some videos on youtube that maybe is made by a more incompetent one of me. I hope I've explained
that to say that you have to do the test, but someone must have put you in the condition of doing it and overcoming it, otherwise it is a charlatan.
Sorry for the rash
put the pictures a little bigger that you struggle to read the question
I mean that when you carry out a test you do it to verify that you have learned a certain knowledge; who should give this knowledge? who does the tests or who wants from the confirmation test... in the specific case or solidworks through tutorials or someone else through specific courses on a topic (prints and surfaces? ).
It is not that working on solids, cuffing here and there, doing the very advanced tutorials on the plates you learn to osmosis to do everything.
I've been using solids for 15 years, and I think I'm doing it pretty well, yet there are modules and commands that I can't use (stamps, routing...) and if they make me take a test on these topics, they'll be my eyes closed. Of course, if I'm asked to pass it (let's hope not) I'll put my hands on and say that I can't use them and put me in the conditions of learning; I'm joined by a good guy, they give me courses, they give me dispenses, they allow me to go out first to do the course and I pay it... but this knowledge to which anelo must have a logical gestation and not shoot me some videos on youtube that maybe is made by a more incompetent one of me. I hope I've explained
that to say that you have to do the test, but someone must have put you in the condition of doing it and overcoming it, otherwise it is a charlatan.
Sorry for the rash
put the pictures a little bigger that you struggle to read the question
gianniturbina
Guest
gianniturbina
Guest
I share your thought; Unfortunately they have asked me (to take a big job abroad) cswe certification; to make it there are both the mold and the certification of the surfaces (the others I have already done);
I still care about learning new things and testing myself; to what you say, I can also add that who produces molds, hardly use sw (pocus suitable); talking about the surfaces and their management, worse than worst sw; the commands have integrated them, I want to learn them and pass this exam; If I understand where I'm wrong, I can definitely pass this test.
if you think it is unsuitable to the forum, ok... no more place and I inform myself through other sources; I just wanted to share a topic that is not dealt with anywhere (on google) and that maybe affects others.
important: I wrote quickly and I would not be misunderstood: It is not a way to attack or fight, indeed... it is a "it is true you are right, but unfortunately it touches me; on the other hand I am happy to learn new things". :
I would also like to thank you because you are one of the few, massive, many times the only one, who has always been constructive and practical answers.
gianniturbina
Guest
Yes, of course; many questions I solved and I also put the file with the solution;
Question 3 is one of those I couldn't do.. .
MassiVonWeizen
Guest
I don't think so. I would like to thank the rapporteur for his work. and it was not a polemic against you, that you are the terminal of the situation; was a rash on the generas for certain mentality that I respond daily.
Unfortunately in these arguments I have difficulty helping you because they are modules that I used little (superfici) or nothing (stampi).
the advice I can give you is to do research with English terms; the forum of solidworks can reveal surprises, as long as in the search engine enter the terms followed by the string site:forum.solidworks.com and only pages of that site will come out. even by youtube seeks in English, even if you do not understand, like me English, you can almost always understand the procedure (maybe you have to look at it 5 times instead of 1)
in addition to hoping that some good soul of users knows the topic
gianniturbina
Guest
Yes, I have already looked, but there is nothing so specific; another channel is to contact directly of colleagues who already have Moldova certification;
in any case, I thank you very much for the help;
I am surprised, however, that in such a forum there is no one who participates or has these knowledge;
you are always the only active with competence; Thanks again and soon!
in any case, I thank you very much for the help;
I am surprised, however, that in such a forum there is no one who participates or has these knowledge;
you are always the only active with competence; Thanks again and soon!
MassiVonWeizen
Guest
Maybe you've seen themhttps://www.google.it/search?q=soli...gynhahub-6qkhcgqcmmq_auidigb&biw=1440&bih=695or just on the certification module (I put the filter duration >20 minutes to look for something more complete)https://www.google.it/search?q=soli...h2qqkhxjgad0qpwuiiq&biw=1440&bih=695&dpr=1.33
gianniturbina
Guest
yes, unfortunately I have already looked at them and I have also performed the exercises; on the web there are also forum discussions where these people describe operations and link files (which sometimes are also found on grabcad);
Thank you very much! in any case this week I am active to contact the people who have passed it ( speak English but it is not a problem); at this point I am very curious to learn.
Thanks again!
Thank you very much! in any case this week I am active to contact the people who have passed it ( speak English but it is not a problem); at this point I am very curious to learn.
Thanks again!
gianniturbina
Guest
now on ebay is also found this:https://www.ebay.it/itm/solidworks-...226654?hash=item34053da9de:g:hg4aaoswm-fb2f-4But who trusts...
MassiVonWeizen
Guest
I'm 4€, I don't think that's great even if it's alone... If you're in there with time, it might be worth it.
gianniturbina
Guest
:d ok you are right