• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

sw 2011

  • Thread starter Thread starter Brigno
  • Start date Start date

Brigno

Guest
I downloaded it but not yet installed.

Has anyone tried it yet?
is it quite stable (not that 2010 shines at this point of view)?
 
Brigno said:
I downloaded it but not yet installed.

Has anyone tried it yet?
is it quite stable (not that 2010 shines at this point of view)?
Click to expand...
I'm testing it at home, but I already had a couple of crashes.
Fortunately I always managed to recover files without losing
Nothing.. .
I wait a bit longer before upgrading 5 machines in the office.
 
Have you tried the news on the equations?

...I am (for me) the most interesting things!
 
Brigno said:
I downloaded it but not yet installed.

Has anyone tried it yet?
is it quite stable (not that 2010 shines at this point of view)?
Click to expand...
you rhyming the quest:
sampom said:
It doesn't seem like a big jump since 2010. nothing revolutionary (I've been trying it for a few days, I haven't done anything yet).

I would say that if you stopped at 2010, no longer being in subscriptions it is not worth renewing it only to switch to 2011 (except "obligations" to customers and/or suppliers).

a couple of "bugghini" I have already found it (think): if you put the welded/coated edge between 2 flanges of sheet metal does not appear welding cosmetic (though with the option aggiungi trama popped).. na cacchiata, but looking at the flight seems a unique piece worked/fuso with rounded edges:smile:

even importing the caterpillar on the table directly from the model (new function) if you have angle strings to alternate strokes on two sides, at the table are turned on the same side; on the one hand there is good, on the other the "enter" caterpillar in the material.

for the rest I do not know; Maybe it looks faster at startup.

greetings
Mar
Click to expand...
I've tried little and simple things, but for now no crash.

greetings
Mar
 
Can you give me some information about photoview360? How do you find the thing compared to before? (substantial differences from photoworks?) has improved the management/creation of textures of materials?
Sorry about the many questions but it's the thing that would interest me more than the 2009 I own now. (other domandina if you can go well also in pm... how much should it cost the update since 2009 professional)
Thanks :wink:
 
I haven't installed it yet (only downloaded). a good thing and discussed several times here on the forum is the defeaturing and that is the possibility to create encumbrances of our assemblies to send to the client "recommended" of the important info for the project but not for the purposes of encumbrance.
I saw a video and I find it very interesting.
 
downloaded but not yet installed.
Perhaps I will also go on a day of xray campus organized by assistance, maybe....

Does anyone have a link to the wathnews?
 
re_solidworks said:
This is also very convenient, once you've made the encumbrance in one part to create the plates you really need a moment.
http://www.youtube.com/watch?v=c4uwxp4o95q
Click to expand...
tested immediately... and I must say that, apart from a smallness (fold lines lose the color set in the options...) I was impressed by the power of that function.
with 2010 is present, but you lose the rest of the body not turned into sheet metal.
:finger:
 

Attachments

Mike1967 said:
tested immediately... and I must say that, apart from a smallness (fold lines lose the color set in the options...) I was impressed by the power of that function.
with 2010 is present, but you lose the rest of the body not turned into sheet metal.
:finger:
Click to expand...
Very true.
the solid converts -lamiera of 2010 we say that it was in embryonic phase. :
 
Hi, I downloaded it but not installed in the office, I would like to do it at home to start playing.
question: if I issue 2011, 2010 remains or is it updated?
[edit0: ...acch... vedo che c'è già la PR1.. parto da quella o serve la PR0 poi la PR1?][edit1: ... toh che strano, il link della PR0 e PR1 dicono "Page Not Found"][edit2: ... ovviamente il download della 2011 PR0 X64 non lo posso installare su un x32 vero? debbo riscaricare proprio tutto?]
 
reggio said:
Hi, I downloaded it but not installed in the office, I would like to do it at home to start playing.
question: if I issue 2011, 2010 remains or is it updated?
[edit0: ...acch... vedo che c'è già la PR1.. parto da quella o serve la PR0 poi la PR1?][edit1: ... toh che strano, il link della PR0 e PR1 dicono "Page Not Found"][edit2: ... ovviamente il download della 2011 PR0 X64 non lo posso installare su un x32 vero? debbo riscaricare proprio tutto?]
Click to expand...
0= Why do you have to mess with a pre-release?
install the final version.
1=c' is out the final version, what do you need to install the pr0??
2= You answered yourself.
 
reggio said:
Hi, I downloaded it but not installed in the office, I would like to do it at home to start playing.
question: if I issue 2011, 2010 remains or is it updated?
Click to expand...
At the time of installation you will find the 2 solutions, you can choose.
I usually keep the last one (for a little at least).
edit0: ...acch... I see that there is already pr1.. I leave from that or do I need the pr0 then the pr1? ♪
edit1: ... toh that strange, the link of pr0 and pr1 say "page not found"]
Click to expand...
Where are you looking? Why do you always want to go screw up? :biggrin:
solidworks2011 is all sp0. that of the pr1 is the enterprise pdm (use that???). and pr means "pre release", let it lose.
edit2: ... obviously the download of 2011 pr0 x64 can't install it on a x32 right? Do I have to reload everything? ♪
Click to expand...
Of course not:cool:
download what you need based on the installation you already have; download manager finds the files you already have and does everything by yourself.

greetings
Marco:smile:

p.s. We expect new admirable discussions:
 
Mike1967 said:
0= Why do you have to mess with a pre-release?
install the final version.
1=c' is out the final version, what do you need to install the pr0??
2= You answered yourself.
Click to expand...
Ah ah! .. again late

It's incredible.
if there was no need to invent it:

greetings
Marco (reggio, we love you:)
 
tried today

He didn't leave me on foot even once and this is already a good sign!

solved the problem with the equations present since 2008 (change everything) and very useful the possibility to import/export them or connect them to an external file.

it seemed even faster than 2010 but on this point I'm not sure.

....a short more detailed evidence
 
in the 2011 version they removed photoworks and inserted within sw photoview360.
do you know even if there is a standalone version of photoview? because he didn't install it to me but I found it an absurd comfort to have the program to make it out to sw.
 
re_solidworks said:
mark this video:
http://www.youtube.com/watch?v=iawtgnu8cx0I found very interesting both the insertion of these welds (it seems really well done) and especially the possibility of being able to collect and bevel in the environment together.
This will save me a lot of work!

I also leave the link of the defeaturing video:
http://www.youtube.com/watch?v=hj-sapyvtly
Click to expand...
that is true on welds, but in my modest opinion it is a function cured too much, (in the workshop often the result obtained is never as from drawing) then it is very sluggish, it is necessary to always select a pair of profiles and to send:angry: if one has a frame + complicated than that of the video bell:wink: I prefer a general note to put on the table:smile:
 

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Total: 0 (members: 0, guests: 0)
Back
Top