symmetrical derivative design allowance

[smoking]

good morning to all, I send an old problem in hope that the new releases contain some solution.
as from title: Is there a procedure to maintain, at the table of a derived part, the quotation already set up in the table of its main part? obviously after copying the design and "replaced the model reference".
the most common case is that of symmetrical details for which you want (or you must for management reasons) to prepare the table.
Thank you.

 

[stefanobruno]

nothing new under the sun.

 

[Cast16]

there is a proposed idea qui from 2014.
the good news is that the state is "changed to: future consideration", but it took 10 years to do so.. .

 

[smoking]

we hope for the future. thanks to everyone for the match.

 

[Peppe]

for personal experiences I have always remade the tables of the mirrors, opening the original table and replicating on the mirrored notes/viste/other.
we admit that it was possible to do everything automatically:
I make my table of the original part and then mirror pattern and table and everything remains connected; Do we like to add or remove a quota/note or anything else on the table of the original model as would the software replicate it on the table of the mirror? It would be impossible at least that this mirror was nothing but a specular "image" of the original. but at this point if I wanted for my reasons to insert notes/quotes or other only on the mirrored table, it would be impossible.
This makes me think that it will be a utopian option to insert into the future.

edit
so if you just want to quickly make the old dwg mirror of autocad would be unique alternative (with all the opposites of the case)

 

[smoking]

for personal experiences I have always remade the tables of the mirrors, opening the original table and replicating on the mirrored notes/viste/other.
we admit that it was possible to do everything automatically:
I make my table of the original part and then mirror pattern and table and everything remains connected; Do we like to add or remove a quota/note or anything else on the table of the original model as would the software replicate it on the table of the mirror? It would be impossible at least that this mirror was nothing but a specular "image" of the original. but at this point if I wanted for my reasons to insert notes/quotes or other only on the mirrored table, it would be impossible.
This makes me think that it will be a utopian option to insert into the future.

edit
so if you just want to quickly make the old dwg mirror of autocad would be unique alternative (with all the opposites of the case)

In reality the need, which I find common to many, is not to create an exasperated automatism. the procedure could consist simply of running the table referred to the native model, creating a copy of the table and replacing the model reference by connecting it to the derived model.
It's the procedure, I guess, most used. works discreetly for example for simple plates with many holes. The choice of the reflection plan is fundamental!
Of course, in addition to the quotas, the axes and the various annotations should be kept, which obviously refer to edges which are not recognized in the phase of derivation.
I would not see it necessary to automatically replicate the quotas possibly added at a later time.
On the other hand, as we have seen, solidworks has predicted for years this possibility.

 

[Peppe]

solidworks I don't know him exactly why I don't comment.
said this after 20 years of use I have now lost some solutions for which I surrender with what passes the convent.