table threaded holes

[Daniele-san]

hello to all and good 2018

I wanted to know which parameter (if it exists or if it can be added) in the standard holes tables (e.g. iso.hol) that manages the type of hole: blind/until after/through everything etc.

 

[320i S]

that I know the drilling tables only manage the thread as mapping parameters, not its depth.
To do what you want, you have to do a fdu, you can handle more functions.

 

[arni1]

hello to all and good 2018

I wanted to know which parameter (if it exists or if it can be added) in the standard holes tables (e.g. iso.hol) that manages the type of hole: blind/until after/through everything etc.

during the creation of the table you can adjust the parameters
selecting the parameters of a blind hole,
depth
depth_filetto
(I do not know the description in Italian)

Hi.
hinges

 

[Daniele-san]

during the creation of the table you can adjust the parameters
selecting the parameters of a blind hole,
depth
depth_filetto
(I do not know the description in Italian)

Hi.
hinges

Bye-bye
thanks for the answer,
Could you be more precise?
which are, in particular, the parameters of the .hol file that determine the depths
reading the ptc guide doesn't seem to have found anything to help me in what I'm looking for
Did I miss something?
Thank you.
Hi.

 

[320i S]

hole depth and thread depth, are the default values when you create the hole by drilling table, but they are and remain numerical values that I know, while if you want the possibilities of "echo", "to surface", "to the next surface" etc. are options outside the drilling table.

 

[Daniele-san]

I take this discussion to ask you for clarification,
after creating a hole table and adding parameters columns directly during table creation I realized that by doing an update everything that was added in the column rows parameters added in table creation stage are all erased
can you avoid?

 

[320i S]

check that when you add parameters, there is the voice to save changes (as happens for explosions etc.).
mine is a supposition, because tables I use very little.

 

[Daniele-san]

check that when you add parameters, there is the voice to save changes (as happens for explosions etc.).
mine is a supposition, because tables I use very little.

Good morning.
in the update saves me the column title with the added parameters but does not save me the data I manually entered in the respective boxes