table to pdf with hyperlinks

[reggio]

hi guys, I already asked the same question in the autocad section because from autocad I would have been more comfortable for various reasons, unfortunately my version does not allow me, so I tried to understand if from the table of sw it was possible to solve ...

In practice, from a sw table, I would like to obtain a pdf document in which there are, within some texts and balls, links to some web pages of our site.

I have seen that both by note and by bubble it is possible, through property, to assign a hypertext address and that, on the table sw the connection works and this would solve my need, unfortunately when I go to print on pdf with pdfcreator (which works with other programs) does not create the link clickable
is it possible to put a link inside a text/sheet on the table and make it work when printed in pdf? How?Maybe I miss some parameter setting or something...

e.g. "cod.123456" must contain the following link vvv.miosito.mi/ricambio123456.html
e.g. "cod.abcd" must contain the following link vvv.miosito.mi/ricambi.html#codeabcd
...

 

[MassiVonWeizen]

if you use the save as>pdf the link works

 

[reggio]

le sa' tutte! :d

 

[reggio]

...but I wanted to integrate the pdf table with links, within another document...

page of presentation
Description
p. pdf table with linksp4... greetings

What do I do? Do I call assistance? :tongue: ah ah ah ah

... we're in charge...

 

[drake]

join pdf when you created them.. .

 

[MassiVonWeizen]

...but I wanted to integrate the pdf table with links, within another document...

page of presentation
Description
p. pdf table with linksp4... greetings

What do I do? Do I call assistance? :tongue: ah ah ah ah

... we're in charge...

but is it always solid or a question of pdf? Are the connections between one drawing and the other solid?
explain better please

 

[reggio]

join pdf when you created them.. .

Okay, but how? I tried https://smallpdf.com/it/unire-pdf but the result does not work: the links are lost
How would you do that?

but is it always solid or a question of pdf? Are the connections between one drawing and the other solid?
explain better please

hello massivonweizen, as I wrote

page of presentation
Description
p3 board pdf with hyperlinks (=>web)
p4... greetings

I would like to create a doc pdf with a presentation page, maybe graphics, then add one or more descriptive pages with word, insert the table you sw that for example will have the pallinatures or descriptions of the exchanges with links to pages of site that maybe explain better or illustrate other photos, and then continue the pdf with other pages ... (they are in via experimentation, but I try to create a book exchanges "multimediale", I would like to get you too to go to linka . . )

 

[MassiVonWeizen]

has ok, so it is about joining the pdf as he had guessed drake.
I'll give you this little program that doesn't need installation.pdftk builder Let us know

 

[MassiVonWeizen]

I did a test and the program keeps the link
View attachment prova link.pdf

 

[drake]

which program that maintains links sincerely did not know... Good to know what's massive!

 

[re_solidworks]

for these things is not the cad but the pdf editor you need, as they suggested. I use expert pdf or acrobat.

 

[reggio]

for these things is not the cad but the pdf editor you need, as they suggested. I use expert pdf or acrobat.

hi! initially I didn't know if you could insert links at the table, with insert / link I wasn't satisfied,
Now it's okay.
the second point is that I usually mold in pdf the e.g. word page, then the table, then a excel sheet (it is an example) and table links, using my pdfcreator (excellent and free) did not remain active (word links or excel instead worked), so I wondered if it was a sw limitation

I'll give you this little program that doesn't need installation.pdftk builder

great boulders!
only new: it is to install, the link brings me to a setup...

ps: I had tried also with architect of the pdfcreator family, but also with that the links were interrupted

pdftk builder: promoted!
expert pdf or acrobat I didn't try it because paid

 

[MassiVonWeizen]

I'm sure no installation is required. none of the site programs require it, it is however specified in the specific pagino as to behave with the software.
alternatively I attach the version I use and that contains only the executable

 

[MassiVonWeizen]

only new: it is to install, the link brings me to a setup...

I only take it back for those who happen on the page:
vine actually required to download a setup, but on the linked page it is specified how to operate to use the software without having to install it.