too heavy file, blocked section.. what to do?

[zetadierre]

Good evening,

I apologize if I'm writing too many posts... But I feel a little distracted by a little delicate situation.

I spent a lot of time processing a glass cover, element of a pretty "cardinal" project. It's the first project I do in vw, but I think I've weighed too much on the file.

Now I'm trying to do a section, but it takes a lot of time, it's half an hour that frys, slowly goes on.. but it is certainly not manageable in a fluid way. the image that place shows you in the plant the situation. Is there anything I can do? Help...

ps: I see now that for a while no attachments can be uploaded. if it can be useful you can see the renders I had posted in this discussion to understand how it is done.. .
http://www.cad3d.it/forum1/showthread.php?t=16125and the link on the image in the plant
http://myfreefilehosting.com/f/bb64f69513_0.3mbare 4 rastremate extrusions that include something like 6000 extruded triangles and something like 300 extrusions you walk... regarding the only cover.. .

 

[zetadierre]

after 45 minutes he made it.. .
http://myfreefilehosting.com/f/fc77d97aae_0.14mbAnyway, if there's anything you can do... I gladly listen to your advice, thank you.

♪

 

[lory.b]

are 4 rastremate extrusions that include something like 6000 extruded triangles and something like 300 extrusions you walk... regarding the only cover.. .

Well... if you have to calculate the section of 6000 extrusions you have to give it time...