v2016

[rinato]

I'll throw it there.
nothing to report, in good or evil, of the above?
I have been using it only for a week, with w10, and it seems stable, apart from the usual ca..ate x certain inputs in the cam.
But I'm beginning to suspect I'm not really understanding certain choices.

 

[ziotoy]

I find the cam has slowed down a lot in the calculation speed compared to v20. especially in the 2.5 axes where the calculation was almost instantaneous. I then noticed that in the classic finish for "painting" the path does not start on the given profile but from the next step...for example if I have a 3mm step it will leave to 3mm from the containment profile. the possibility of defining a free-form tool would be useful if the tool created could be used also for 3d paths and not only for contours.
but certainly useful.
the part cad instead seems to me improved thanks also to the grouping of some functions and to the addition of others.
aspect reflections of other users.
Say hi.

 

[rinato]

Hello Uncletoy, have you noticed that now the clock-rotellina during the calculation of a p.u. cam is a real watch with 2 hands (green x hours, red x minutes) that turn random? I don't know how I lived without so far! I mean... I mean...wow! the next patch will let us choose between a longines and an iwatch! we have cars and s.o. 64bit to see icons timeranee animated, what more can a pyrla always closed in the office?
However, yes, the cam is slower than v21. Now it seems to have recovered a bit, but nothing stratospheric.
Greetings, reborn.

 

[ziotoy]

Hello Uncletoy, have you noticed that now the clock-rotellina during the calculation of a p.u. cam is a real watch with 2 hands (green x hours, red x minutes) that turn random? I don't know how I lived without so far! I mean... I mean...wow! the next patch will let us choose between a longines and an iwatch! we have cars and s.o. 64bit to see icons timeranee animated, what more can a pyrla always closed in the office?
However, yes, the cam is slower than v21. Now it seems to have recovered a bit, but nothing stratospheric.
Greetings, reborn.

As for the cam interface it has changed considerably but I think that then working we get used to it. What I don't want is that a new release should contain improvements of what you already have and not worsening. slowness in calculation compared to v20 is indecent. there is no longer the past menu that was very convenient in some cases...and another thing that I did not like (but perhaps only to me) is that the "fast keys" are no longer "sensitive" to the area where the mouse is located. in the sense that with the v20 only one key could work for two commands depending on whether the mouse was in the graphics area or in the navigator cam area. Now it touches me to change keys to postprocess, print worksheet, etc...when it had become an automatism.
Say hi.

Did you find what I said about the finish??

 

[rinato]

I'm sorry, I haven't been able to dwell on the details yet.
But in the small course that they did to me on the cam, they showed me that there is a visualization for past, in the "perc. ut. management", but maybe it's not what you're looking for, right?

 

[ziotoy]

I don't think so. there is only a viewing speech, not editing.. At least I think!

 

[rinato]

I figured.
Probably what you're looking for, I never even noticed. . .

 

[endrio1]

there is no longer the past menu that was very convenient in some cases...

Fortunately the past menu still exists but remained only on the old 3d operations, which in some cases I like more than the new ones.
on the old you can still work without the list faces.