vibration damping

[ector]

Hey, guys.
I have a problem, I have to dimension a dynamic and sincerely dampener I just don't know what fish to take. . .
I basically have to decouple my component of the rest of the vehicle, so that the latter does not suffer the vibrations transmitted by the vehicle and vice versa. the component in question transmits a force of x newton for a cycle of y times/minute.
They tell me that the system is at 1gdl, of the type mass-smotor and up here ok, but once you identify the magic formulas how do I find the dampener that does to my case?
I thought I'd put those in the annex...
and, after having them set, see how everything responds.
What do you say?

thanks in advance

 

[PaoloColombani]

I thought I'd put those in the annex...
and, after having them set, see how everything responds.
What do you say?

Amazing, I had an eye on a magazine with the advertising of the same product when I opened your post. what you have attached is advertised as an emergency decelerator, or a mechanical stop for linear axles. here says that energy is absorbed 100% without any bouncing effect. If the product is not the same at least the idea is that because if you have only one gdl you will need a linear dampener. I would advise you to contact the supplier, only they can assure you if the component is suitable for purpose.

otherwise you should do a search under the heading "insulators" "smorzatori", provided that a passive dampener is sufficient, and that the application does not require an active dampener.

 

[ector]

Amazing, I had an eye on a magazine with the advertising of the same product when I opened your post. what you have attached is advertised as an emergency decelerator, or a mechanical stop for linear axles. here says that energy is absorbed 100% without any bouncing effect. If the product is not the same at least the idea is that because if you have only one gdl you will need a linear dampener. I would advise you to contact the supplier, only they can assure you if the component is suitable for purpose.

otherwise you should do a search under the heading "insulators" "smorzatori", provided that a passive dampener is sufficient, and that the application does not require an active dampener.

which combination....ok contact the furnace and I see what he thinks.
Thank you very much

 

[ector]

Nothing, the supplier says the answer is too slow....nn is fine.
I attach a sketch of the updated system, so be clearer.


waiting for your help I thank you in advance

 

[Pastorman75]

as a suggestion, I once rated the use of

"wire europea isolar"

The company is enidine.
search on google and find them immediately.

greetings