weight assemblaggio

[3Dtech]

mayor thingi?

that I create does not recognize the mass properties of an imported assembly.

 

[Prof.]

You have to give it to him.

 

[3Dtech]

You have to give it to him.

I'm sorry, but I've never given any weight to the details because I've never served.
but assigning the material to the commercial details, it becomes challenging. especially where there are so many. I can't decide what to assign weight and what not?

 

[Prof.]

you can do what you want but if you want the weights of the commercials to be considered you must assign or a weight or material. If you don't give him this information you won't have a proper weight of your set.
I also suggest you, to simplify your life:

1. to import you commercials like parts and not like assemblies
2. create a part template that already has a density or material assigned

ciao.

 

[3Dtech]

you can do what you want but if you want the weights of the commercials to be considered you must assign or a weight or material. If you don't give him this information you won't have a proper weight of your set.
I also suggest you, to simplify your life:

1. to import you commercials like parts and not like assemblies
2. create a part template that already has a density or material assigned

ciao.

I put the weight on the business. the problem is that being a very big set now it takes a lot of time even to open the design of a washer. Maybe I have to fix something in the settings.
However, the details some cylinders unload them as axiemi because I must be able to move them.
while for the default density, it is already set.

always here in the forum I found a discussion about it:

TABELLA CON IMPOSTAZIONI PARTE

Buongiorno. Ho un assieme composta da sottoassiemi e parti che hanno avuto origine in svariati modi, alcuni sono stati importati tramite files IGES o STEP da altri programmi o scaricati da Internet, alcuni sono nativi di Pro-e ma non conosco bene le impostazioni di partenza. Il problema è...

www.cad3d.it

 

[3Dtech]

other question:
How can I make sure that the relationship remains in the mirrored parts or assemblies?
/* standard

peso=mp_mass("")because in the parts you mirror the I lose.