xrif froth regolation

[il secco]

hi to everything I find to have a dwg file inserted as xref, which inside the file where it is inserted as xref is displayed blurred as if it were on a layer turned off.. I am sure that all the layers are reconciled and turned on.any knows how to help me thanks to everyone.

 

[lattu]

it is not that you have activated change local reference?

 

[PlannerRoad]

the shade of xrif is normal, it is a function of autocad and can be adjusted with the variable:
xdwgfadectlfrom the online guide:
determines the attenuation intensity of all external reference objects dwg.

the valid range of values for the xdwgfadectl system variable is between -90 and 90. when the xdwgfadectl variable is set to a negative value, the xrif shade function is not activated, but its setting is stored.

0 dwg external reference objects are not foamed.

>0 if the value is positive, check the shade rate up to 90%

<0 if the value is negative, the blocked external reference objects are not blurred but the value is saved so you can use it by changing the sign
so if you want it without shade set the variable to 0.

 

[lattu]

is a new command, because 2007 does not recognize it and there is not even in the online guide

 

[PlannerRoad]

is a new command, because 2007 does not recognize it and there is not even in the online guide

introduced with version 2010, I didn't specify it.

 

[il secco]

thanks a thousand planner problem solved with 2010. Is there a similar command with 2009?
Thank you.

 

[PlannerRoad]

thanks a thousand planner problem solved with 2010. Is there a similar command with 2009?
Thank you.

No, it doesn't exist. is a function introduced only in 2010.

 

[zighi]

but is it possible to make sure that when moulding the drawing under the xref, the xref is semi-transparent possibly monochromatic in order to enhance the design part created ex novo?
Thank you.

 

[PlannerRoad]

but is it possible to make sure that when moulding the drawing under the xref, the xref is semi-transparent possibly monochromatic in order to enhance the design part created ex novo?
Thank you.

It's time to show up first.
http://www.cad3d.it/forum1/showthread.php?t=187