• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

license transfer: exchange between base and professional

  • Thread starter Thread starter reggio
  • Start date Start date

reggio

Guest
I have 2 licenses available: basic+professional,
on the laptop at home I always kept installed the license "supply" professional
and in the office the basic license (the professional license "true" uses my colleague).

Sometimes, it would be convenient to have available the professional "supply" license to make a quick render without disturbing my colleague, so the other day I tried to release the lic on my laptop at home, to release my lic base and then to use the professional "supply" license on my pc in the office...
only that the pc in the office continued to try again and again only the base...

question: to make the exchange should I install the professional on my pc and then when I do not use to release it and load the base? ... or how?
 
reggio said:
question: to make the exchange should I install the professional on my pc and then when I do not use to release it and load the base? ... or how?
Click to expand...
I think what you want to do is illegal. so you would have the professional license and the home-professional active and working at the same time. I would avoid you, most likely solidworks would call home to try this thing.
 
cacciatorino said:
I think what you want to do is illegal. so you would have the professional license and the home-professional active and working at the same time. I would avoid you, most likely solidworks would call home to try this thing.
Click to expand...
no, of course, and I use only one, even the assistance told me that it is possible, among other things when the internet business, if you leave activated also the other, it warns you that it is a license already occupied. . .
in practice give the possibility to use it or in the office on your pc or when you are out on your laptop.

... from professional to base I remember that we have already done it, on the contrary I fear you have to install the upper version then to the limit descend (I think... Although, according to me the dvds are all the same and what makes the difference is the license... )

I'm not sure. That's why I was asking for you.
 
my var, when we bought the software, told me that it is possible
install the sw both in the office, and at home.
In fact with the same license I have the two installations.
On the other hand, if I'm in the office, I'm not at home... and vice versa.
also the release/resumption of licenses is possible, but it is a ball.
 
Mike1967 said:
my var, when we bought the software, told me that it is possible
install the sw both in the office, and at home.
In fact with the same license I have the two installations.
On the other hand, if I'm in the office, I'm not at home... and vice versa.
also the release/resumption of licenses is possible, but it is a ball.
Click to expand...
hi really isn't a ball, it's a few seconds operation, only I can't. .
 
Yes, the 2 installations are possible if you do not use them simultaneously.

about the version seems to me that depends on the serial number (when you installed memories that were different?). if you have installed a base with its serial will always be that, regardless of activation of the license (which has no number; How did you choose one rather than another? this again, happens when you install according to the serial you use).. I think.:smile:

you could (maybe) install the 2 versions on the same pc (choose new independent installation. I on one same I have 2009, 2010 and now 2011.. obvious, "spente" 2 out of 3) and active/disactive each time depending on the needs. . .

for these doubts the only one is to ask the var.

greetings
Mar
 
reggio said:
hi really isn't a ball, it's a few seconds operation, only I can't. .
Click to expand...
Yeah, yeah, yeah, but it's always something I don't like.
check the procedure well, I have no idea what it is, it's been years since
I use that system more. Maybe you have to call the horn of kidney
for delusions.

between the other I have installed through administrative image.. And I've never given back the licenses... between an installation and the other...
 
reggio said:
hi really isn't a ball, it's a few seconds operation, only I can't. .
Click to expand...
? ?
In fact, it is immediate (a few seconds for connection). .
from the cascade menu with the questioning "points" choose transfer or activation licenses. clearly you must be connected to the internet.. and have admin rights, otherwise voices are not present.

greetings
Mar
 
re_solidworks said:
to activate the pro you have to put the pro serial during installation. . .
Click to expand...
ah.. and the only way at this point is to reinstall?

and the next time I move to the base and then again to the professional how do I have to do? reinstall all times or just put the profess first time?
 
reggio said:
ah.. and the only way at this point is to reinstall?

and the next time I move to the base and then again to the professional how do I have to do? reinstall all times or just put the profess first time?
Click to expand...
But did you read all the speeches? ?
 
no need to reinstall, from control panel/install applications choose solidworks, change and follow the instructions. It's fast enough even if I wouldn't do it too often, it's stuff that feeds problems and I think you have enough with swx....
 
re_solidworks said:
no need to reinstall, from control panel/install applications choose solidworks, change and follow the instructions. It's fast enough even if I wouldn't do it too often, it's stuff that feeds problems and I think you have enough with swx....
Click to expand...

1) ooohhhhhh bene, grazie re_solidworks, ce l'ho fatta, da control panel Of course.:finger:

2) (Watch me, I am clear, I never have it with you, indeed I thank you because you always help me with my exits...) but, so much x always come back on that point, but xkè if I use the instrument that should be prince-talk of "license manager"- do not get the same things that I get with control panel? ...of windows .... of microsoft....
 
reggio said:
2) excuse me, I am clear, I never have it with you....
Click to expand...
and we'd miss it! :biggrin:
Why did we do that to you? ::smile:

But neither do we have it with you. only that sometimes, really, you forgive us:biggrin: You have your own approach to the program.

greetings and always cheerful
:-)
 
re_solidworks said:
... it is fast enough even if I wouldn't do it too often, it's things that feed the problems and I think you have enough with swx....
Click to expand...
... said the prophet.. .

I did it once. In fact 1/2...

first I released the prof from the laptop, and the base from the pc, then I loaded in the pc the prof: all right.
Now I wanted to load the base on the laptop, but when I go to start the procedure, swx crashes... does not block the program, simply does not take the continuous command of the procedure.. .
I try to uninstall. . It stops...
I try to install it blocks.. .
I try to correct it blocks.. .
always standing there with the continuous command that is not taken...

What do I do? Is it a bad gate?
all or only those of swx09 or 2010 or 2011?
:36_1_4:
 
reggio said:
What do I do? Is it a bad gate?
all or only those of swx09 or 2010 or 2011?
:36_1_4:
Click to expand...
Badly deleted... all versions ... and also discarded in the register by renameing the various swx folders .... but nothing, he forgot my serial (which first always reminded the wrong one) but when I get to install and I want to press ahead... nothing happens, the button doesn't bend... and everything remains there still....:confused:

I'm still here.
- format everything:(
- launch the notebook from the window
- ...

Or? :frown:
 
reggio said:
Badly deleted... all versions ... and also discarded in the register by renameing the various swx folders .... but nothing, he forgot my serial (which first always reminded the wrong one) but when I get to install and I want to press ahead... nothing happens, the button doesn't bend... and everything remains there still....:confused:

I'm still here.
- format everything:(
- launch the notebook from the window
- ...

Or? :frown:
Click to expand...
version ? (2009-2010-2011? ? )
32 or 64 bits?
Internet connection?
Did you leave your PC in that situation? Are you stuck hours?
Can you post a screen?
 

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Total: 0 (members: 0, guests: 0)
Back
Top