change the style of the fold line

[jimbossox]

a greeting to all, I know that I should not use the forum only to advance my request but perhaps what I have to ask will affect more than someone.

for a few months that I have passed to sw 2010 and it is for several days that I have been looking for a system to change in default the style of the fold line in the table or use the continuous line for the fold "just" and the dotted line for the fold "up".
I thought that finding a way to fix this small variation of notes was easier as drawings with this nomenclature, and I see little bits around; I'm actually wondering if it's really possible to make this change. technical assistance is being requested at the central office and I already imagine what their economic request will be to make this change that I thought was trivial.
Thank you all.

 

[Mike1967]

a greeting to all, I know that I should not use the forum only to advance my request but perhaps what I have to ask will affect more than someone.

for a few months that I have passed to sw 2010 and it is for several days that I have been looking for a system to change in default the style of the fold line in the table or use the continuous line for the fold "just" and the dotted line for the fold "up".
I thought that finding a way to fix this small variation of notes was easier as drawings with this nomenclature, and I see little bits around; I'm actually wondering if it's really possible to make this change. technical assistance is being requested at the central office and I already imagine what their economic request will be to make this change that I thought was trivial.
Thank you all.

I red the "up" and black the "down".

 

[jimbossox]

I red the "up" and black the "down".

in fact I had found how to make variations on the color, but in the office they only print in black and white. We diactate that until today we have used this style in recent months we are adopting the up and down style, but the office wanted to maintain the "old style". cmq thanks.

 

[SolidUser]

a greeting to all, I know that I should not use the forum only to advance my request but perhaps what I have to ask will affect more than someone.

for a few months that I have passed to sw 2010 and it is for several days that I have been looking for a system to change in default the style of the fold line in the table or use the continuous line for the fold "just" and the dotted line for the fold "up".
I thought that finding a way to fix this small variation of notes was easier as drawings with this nomenclature, and I see little bits around; I'm actually wondering if it's really possible to make this change. technical assistance is being requested at the central office and I already imagine what their economic request will be to make this change that I thought was trivial.
Thank you all.

spr 585454 - “unable to change the line type in flat-pattern view of sheet metal file.

 

[jimbossox]

spr 585454 - “unable to change the line type in flat-pattern view of sheet metal file.

Thank you for your confirmation.

 

[sampom]

I red the "up" and black the "down".

But you're sending color prints in the shop? (or do you leave the bending notes anyway?). . and photocopies, etc. etc. ?
I know that now all the machines print in color, but the technical drawings have always been in b/n.
That's an option I need very little in my opinion.

greetings
Marco:smile:

 

[Mike1967]

But you're sending color prints in the shop? (or do you leave the bending notes anyway?). . and photocopies, etc. etc. ?
I know that now all the machines print in color, but the technical drawings have always been in b/n.
That's an option I need very little in my opinion.

greetings
Marco:smile:

:biggrin:
we also print color formats a1... I don't know a technician.
most designs are for indoor use and
bender is happy to see at a glance as
Turn the folds.
sin that with multibody only works on one
sheet metal.
thank you on, if it works, I will be able to satisfy that lack above, with a different line:

 

[SolidUser]

thank you on, if it works, I will be able to satisfy that lack above, with a different line:

You have to make an er request.
You look for that juice and put it as your request.
the more we take weight.
If you don't find it, try this spr 585964.

 

[SolidUser]

:biggrin:
we also print color formats a1... I don't know a technician.
most designs are for indoor use and
bender is happy to see at a glance as
Turn the folds.
sin that with multibody only works on one
sheet metal.
thank you on, if it works, I will be able to satisfy that lack above, with a different line:

was solved with the 2011 SP3.
It was solved in their own way.
I attach the assistance video to show how the problem is solved for them.
I still create an er, because I don't like it.

 

[Mike1967]

was solved with the 2011 SP3.
It was solved in their own way.
I attach the assistance video to show how the problem is solved for them.
I still create an er, because I don't like it.

already, in that way I did it when I drew in 2d... about
10 years ago...
thanks on, tonight I will add the request spr 585964... :smile:

 

[SolidUser]

already, in that way I did it when I drew in 2d... about
10 years ago...
thanks on, tonight I will add the request spr 585964... :smile:

it is not necessary to forward it, for them it is resolved with the SP3.
I sent an er.
We wait for an answer and if confirmed, I will let you vote for all those who believe it necessary.

 

[Mike1967]

for them is resolved with the SP3.
.

I hope the malfunction I'm experiencing is due to ev3...
because otherwise they must put their hands back quickly: the change of style line
It doesn't always work, but only when it's "good"... what balls.