mode selects as edges

[Brethil]

Bye to all,
an information, if you need me to have to turn off a nice set of edges from *.idw drawings but now that you select everything and disable the visibility I make in time to stamp and go home.. .
...how can I accelerate this operation?
Is there a cult somewhere that reveals everything?
...for example in the design settings there is to flag memory saving option; Is it not that by activating that my commands are less involved in running?

Thank you all in advance

 

[stefanobruno]

if by necessity I found myself having to turn off a nice set of edges from the drawings *.idw

You got some pieces you don't want them to appear?
Can't you post a bunch of what you want to do?

 

[Brethil]

Hi.
thanks for the answer, if you see the attached image, you can notice that it is a ring that has two sets of crossed grids; the problem is that when I put this detail on the table, if seen from afar, it is a big black circle indistinguishable, due to the fact that the edges of the mesh overlap to create that slaughter. . .

Now, I found that if they select everything as edges and then remove visibility, these disappear and I no longer have any problems whatsoever; the only thing is that inventor puts us a lot of time between selecting as a corner and removing its visibility. . .

I simply wondered if it is possible to circumvent the problem by disabling a priori the edges of a single detail so that it is put into the table already smooth. .

If not, I have to wait for the whole string that inventor puts us in time to die in front of the pigeon.

thanks again in advance

^

 

[Tarkus]

But sorry, the grill is a part, a right ipt?
Can't you just take away this?

 

[Brethil]

But sorry, the grill is a part, a right ipt?
Can't you just take away this?

Hi.
I thought about it, but if in some tables the machines are too tilted you can see that inside the tower is empty; ok these are representative 3d models; but I don't want a client to put the question because inside the tower is empty.. .

and then for an aesthetic factor, the nets I need to show you...that is, at least the outside machine must be very faithful to reality...and cmq it was for me to read them too...sigh!! !


_

 

[Brethil]

Bye to all,
an information, if you need me to have to turn off a nice set of edges from *.idw drawings but now that you select everything and disable the visibility I make in time to stamp and go home.. .
...how can I accelerate this operation?
Is there a cult somewhere that reveals everything?
...for example in the design settings there is to flag memory saving option; Is it not that by activating that my commands are less involved in running?

Thank you all in advance

boys, I'm desperate; I am now having to disable an endless series of under-axioms that in the idw in question are about 600...the problem that selects it as edges, works on the individual instances and I cannot give the command to the mother series that encloses all the subassiems interested in disableing the edges....how the hell do I do? Do I have to turn off 600 assemblings from the idw tree all one at a time?

I hope I don't, or I'll kill myself.

Please help me if you can

_

 

[arzigogolo]

boys, I'm desperate; I am now having to disable an endless series of under-axioms that in the idw in question are about 600...the problem that selects it as edges, works on the individual instances and I cannot give the command to the mother series that encloses all the subassiems interested in disableing the edges....how the hell do I do? Do I have to turn off 600 assemblings from the idw tree all one at a time?

I hope I don't, or I'll kill myself.

Please help me if you can

_

have you tried to suppress the processing that gives rise to the grid in the part?
Then it seems to me that you can reactivate it only in the assistance you are interested in.

 

[MauroM]

creates a view configuration in the iam (other than main or default) in which you remove visibility to everything you want. then goes into the table, double-click the view and select the newly created view configuration.

 

[Brethil]

thanks guys, I appreciate your availability; but putroppo I can't in any way turn off the edges if not levering them from each part or iam from the tree in idw; and consequently I find myself with a tide of edges that make me all black; also because levering every single representation for me means staying 6 days on the pigeons...impossible have not implemented the deactivation of edges in idw on a complete set of elements? ? ?

cma thanks to the same

_