how to cut surfaces?

[reggio]

hi guys, I have a container found on the net, made with infinite number of surfaces ... to cut to show the content ...

I tried with some methods, but I can't solve, would you give me a hand, a suggestion?

I attach the model with the 3 sketches that serve to cut into the inside of the box.

 

[MassiVonWeizen]

I'm killing myself on something like that.
use short/wire command
from toolbar > trim surface
by menu functions>superfici>accorcia

but do not use extruded bodies, but sketches

 

[MassiVonWeizen]

consider that many surfaces, those completely inside the sketches, you will have to delete them by hand
the result should be this

 

[reggio]

Hi, it came better to tea!

... to me there are several surfaces...

do you have a method to select all surfaces (or bodies) and tell them that they are only to be suspended for this configuration?

 

[MassiVonWeizen]

a manina, one at a time

 

[reggio]

a manina, one at a time

: eek: ... shameful swx@#*

Thanks massive! :

 

[reggio]

a manina, one at a time

... from the streets, perhaps so you take a lesser hair
... sin does not even work with the selection to "retangle" autocad style ...

 

[MassiVonWeizen]

look to clear the surfaces I didn't take more than 10 minutes, keeping me wide.
I suggest this procedure:
active surface selection filter*
make group selections then do canc*
proceed until you have eliminated all those that do not interest you
Optional steps**
select the remaining surfaces and put them in a folder and suspend it
eliminate surface elimination functions*
select the reappeared surfaces and insert them into another folder
suspend the last folder and reactivate the other

*This method does not definitively eliminate the surface but creates a function that suppresses it; if it is necessary to recover a surface it is sufficient to change the function that contains it

**passages that allow you to better manage surfaces by creating more configurations