use delimitation rectangle as reference for plans

[Sp4rk0]

Good morning.
I use the delimitation rectangle to control the encumbrances and use it as a visual reference to create the support plans of my structures, can I exploit the encumbrance points of rectangles as a reference?

I would like to use the delimiting rectangle in a physical way and use the encumbrance points and straights as a practical reference to create plans or sketches?

Thank you.

 

[MassiVonWeizen]

Of course, it is a 3d sketch included in the folder of the cut distinction. just expand the distinct, show the sketch and use it.

 

[Sp4rk0]

But the cut-off distinguishes me if I work on one side, if I have to use it together how can I do it?

 

[MassiVonWeizen]

the delimitation rectangle is specific to the environment part because you can use it only in the cutting distinct.

If I have to use it together how can I do it?

and what is the problem? You mean if, in the environment together, you expand the part you don't see the separate cut? or that if in the environment part you have shown the sketch then in the environment together do not see it?

 

[Sp4rk0]

No, I need the selection of the rectangle at the first level, in the larger axieme.
I don't know how to get out of the cut, that on the part is related to the part.
or there is something that escapes me and I don't understand:

 

[MassiVonWeizen]

in your first post write

I use the delimitation rectangle to control the encumbrances and use it as a visual reference to create the support plans of my structures, can I exploit the encumbrance points of rectangles as a reference?

Now you talk together, so my question is: in ambinete together can you get a delimitation box?

I use the delimitation rectangle to control the encumbrances and use it as a visual reference to create the support plans of my structures, can I exploit the encumbrance points of rectangles as a reference?

I have already answered you in post #2

try to make clarity on your question leaving nothing implicit, please

 

[Sp4rk0]

Yes, but the question seems quite clear to me, I want to use the dots of the delimitation rectangle together, you told me that I have to show the 3d sketch of the cut-off, but the separate cut I don't have it together, I have it inside the part... .

 

[MassiVonWeizen]

I'll be the one who writes in the first post.

I use the delimitation rectangle to control the encumbrances and use it as a visual reference to create the support plans of my structures, can I exploit the encumbrance points of rectangles as a reference?

So I answer this question of yours, which, as you say, is quite clear:
The answer is yes. Show the sketch and select points and lines

 

[MassiVonWeizen]

never be the case that you mean the selection rectangle in environment together I don't know if it's possible because I never used it and I only find out now. so, not having underhand 2019, I cannot verify it.
always in the same way you can view the delimitation rectangle in environment part (which differs from the delimitation rectangle of the cut distinction)

Now, since in your first post you don't write that you work in the environment together, that you don't know what version you're using and then if you have a delimiting rectangle in the environment together, that you put an unclear image, that you should not assume that you know all about the program especially on recent functions, to me your initial question is anything but clear.
in post #4 I wrote, unknowingly, that the pane is specific to the environment, when it is not so; why did you not correct me?

tomorrow I see how it behaves
in the meantime this page a macro is reported.
you know if it works

 

[MassiVonWeizen]

But it's fair to say that I didn't even notice in the image of the post#5 of the imitation pane icon

 

[MassiVonWeizen]

@sp4rk0 hai risolto

 

[Sp4rk0]

hi, sorry I'm late, no I can't use the rectangle points, but at least the visually impact.

Thanks anyway.

 

[MassiVonWeizen]

I have reported a macro that should turn the phytitic rectangle into real rectangle

 

[Sp4rk0]

I have reported a macro that should turn the phytitic rectangle into real rectangle

Where do I find her? ?

 

[MassiVonWeizen]

#post #9

in the meantime this page a macro is reported.

 

[Sp4rk0]

Thank you.

 

[Sp4rk0]

It works!
I also found a macro to put more assemblies in flexible mode at once!

 

[MassiVonWeizen]

I also found a macro to put more assemblies in flexible mode at once!

you may also report it to other users

 

[Sp4rk0]

ci provo xd