tomy_it
Guest
I look for those who can rub my legs in wood for a coffee table
Stefano_GS
Guest
Where are you?
Anyway I think any carpenter near your house can
Anyway I think any carpenter near your house can
PIETRO2002
Guest
non stiamo esagerando a fare certe domande qui?
tomy_it
Guest
tomy_it
Guest
sleep di monza
PIETRO2002
Guest
needs someone who has a numerical control machine and who can find solid wood panels of that size. . I'm a mechanic. I've never worked wood. .
MassiVonWeizen
Guest
What kind of wood?
Do you supply the material?
treatments to do
size?
budget?
3d printing, obviously not wood, did you think about it?
only some info to provide
Do you supply the material?
treatments to do
size?
budget?
3d printing, obviously not wood, did you think about it?
only some info to provide
PIETRO2002
Guest
It's probably a style table and it must be wooden. Maybe, instead of starting from a unique wooden board, which is probably not found, starting from a sprout consisting of three pre-set and glued beams... but at this point it serves the opinion of some good carpenter, if there is on this forum!
MassiVonWeizen
Guest
my answer was just to point out that there is missing information that could serve to give an estimate of the job to do.
even the section according to me is wrong; It is true that such a job you usually do it with cnc, but it does little to us with the speech cam, in the mechanical section, which will be the rent of the supplier. Maybe there are carvers around Italy who could hand it over.
Here we have an initial vague question, made in a wrong section, which is a job offer
even the section according to me is wrong; It is true that such a job you usually do it with cnc, but it does little to us with the speech cam, in the mechanical section, which will be the rent of the supplier. Maybe there are carvers around Italy who could hand it over.
Here we have an initial vague question, made in a wrong section, which is a job offer
tomy_it
Guest
Hello, thank you for the answer, here are the answers
What kind of wood? oak, other wood but treated to look like oak
Do you supply the material? No.
treatments to make matt varnish finish
size? here an image
budget? 2 of these legs, and it is also necessary to estimate the cost for a production of batches
20 pz
What kind of wood? oak, other wood but treated to look like oak
Do you supply the material? No.
treatments to make matt varnish finish
size? here an image
budget? 2 of these legs, and it is also necessary to estimate the cost for a production of batches
20 pzStefano_GS
Guest
It is a remarkable dimension.
I would turn to a craft furniture if you have it nearby, they will know if you can do it by hand (not suitable for lots) or to whom to turn if they are not equipped
I would turn to a craft furniture if you have it nearby, they will know if you can do it by hand (not suitable for lots) or to whom to turn if they are not equipped
ale47p
Guest
Well also in the padovana if it is for that it would not hurt to know someone who works the wood to cnc...without soiling it of oil fat etc because it also rubs iron aluminum etc.
if someone passes here please...just a shot
if someone passes here please...just a shotvmirko
Guest
I only see the message for my legs now.
I'm a monza, too.
I'm a monza, too.