Use rotted bees

[procedi]

good day, I'm trying to create through solid edge bees, a fully full unique body starting from an assembly.
from user interface this process is feasible by importing as a copy part in sheetmetal environment the assembly concerned, and selecting the options of "keep colors" and "fill blank spaces" that proposes the command "copy part".

via bees, I'm trying with constructs "copyconstructions" e "addcopy partex" but I do not find the function/variables that allow me to have the same result.
thanks 1000 in advance for support
france

 

[Be_on_edge]

Could you argue more, what does not work in the methods listed above?

 

[procedi]

if we use addcopiedpartex.html the result is grey, it does not maintain the colors of the original assembly, and we do not find either a version of the function that has the parameter to copy the colors or another way to import them.

if we use copyconstructions~addex.html We get separate parts and we don't know how to join them in one body, we tried to use the union function but we can't find the 'bodies' to apply it to.

 

[Be_on_edge]

if we use addcopiedpartex.html the result is grey, it does not maintain the colors of the original assembly, and we do not find either a version of the function that has the parameter to copy the colors or another way to import them.

I took a look and the main problem is that the 'solidedgepart.copiedpart' object does not expose the 'copycolors' property accordingly the method to create it does not accept this parameter in input. You should report this to siemens usually are very reactive for problems with bees.

if we use copyconstructions~addex.html We get separate parts and we don't know how to join them in one body, we tried to use the union function but we can't find the 'bodies' to apply it to.

with 'copyconstructions' get construction geometry and not project, first we have to convert them with method toggleto design (building bodies find them in the collection constructions), later with the method union we go to join the project bodies you find in the collection models

 

[vespa_83]

Interesting!
I'll do it by hand.
asm -> x_t -> part
eliminate tangences with 0.1 mm offset
toll/topping holes
with excavations and protrusions simplify the interior, then the "fill" as a vase.
the process was complicated and full of pitfalls, it takes me 3 or 4 hours.

 

[Be_on_edge]

tangences can be eliminated during the "part copy" with the option "correct unreal and unified conditions" and at the same time use the option "remove blank spaces" to eliminate internal voids.

the passage "fill empty spaces" is also obtained through the command "elimina faces" and in the type of selection use "internal vacuums"

 

[procedi]

thanks, we managed to get the desired model with a couple of steps using:

1. copyconstructions, toggletodesign and union to get a single piece cable
2. copyconstructions with delete voids to get a single full piece

Now we have the problem that solidedge gets stuck much more often, I don't know if it's just because we open and close the various assembly, part and sheetmetal environments or if there is any other reason, however once restarted it back to work.

We did not report anything to siemens because we did not know where to do so and we still reached an acceptable solution.

I took a look and the main problem is that the 'solidedgepart.copiedpart' object does not expose the 'copycolors' property accordingly the method to create it does not accept this parameter in input. You should report this to siemens usually are very reactive for problems with bees.



with 'copyconstructions' get construction geometry and not project, first we have to convert them with method toggleto design (building bodies find them in the collection constructions), later with the method union we go to join the project bodies you find in the collection models

 

[Be_on_edge]

Now we have the problem that solidedge gets stuck much more often, I don't know if it's just because we open and close the various assembly, part and sheetmetal environments or if there is any other reason, however once restarted it back to work.

the various objects open with bees are to be closed in order to avoid making solid edge unstable.
read This is chapter of the sdk, there are some shortcomings to use.

in particular:

• connecting to solid edge
• creating macros
• handling 'application is busy' and 'call was rejected by callee' errors

 

[procedi]

Good morning gentlemen,
Thanks to 1000 of your "draws"....we are successful with the above functions indicated to pilot if and to realize a first "prototype" of configurator that has aroused interest in several of our customers.

I do not know if I am in the right section, but at this point we would also be looking for a collaborator to further develop this tool of development by evaluating together compensation/oraris and everything necessary (bologna zone).
Do you think there might be any interested? if we can get in touch? (if they are in the sez. wrong excuse me....and give me directions on where the request is going).
Thank you.
france

 

[Be_on_edge]

I do not know if I am in the right section, but at this point we would also be looking for a collaborator to further develop this tool of development by evaluating together compensation/oraris and everything necessary (bologna zone).
Do you think there might be any interested? if we can get in touch? (if they are in the sez. wrong excuse me....and give me directions on where the request is going).

here in the forum is the section job offers