1603 error in installation phase

[mubert]

hello to all I have a problem with installing autocad 2008.
I just changed my computer, and I wanted to reinstall the programs I used before.
However with autocad 2008 I can not, I get irreversible error during installation, for accuracy error 1603 and I no longer know what to do.
some data that could be useful to you:
so windows xp
cpu intel q-core 2.66ghz
graphics card envy gf9600
Thank you.

 

[lattu]

do you have the compatible system, or is it 32 or 64 bit?

 

[PlannerRoad]

see here:
http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteid=123112&id=10310469&linkid=9240617

 

[liber]

I would try to copy the dvd to a folder and run from the installation

 

[mubert]

My system is 32 bit

 

[mubert]

already done, indeed from there gives me this problem

 

[lattu]

and did not try to launch the installation from dvd?

 

[mubert]

tried also that but nothing

 

[liber]

if you have a pc with very updated operating system with the latest netframework
I'd try to uninstall all the netframeworks and feel the instllation from hardisk,

or change the setup.ini file not the root of the dvd bensi' what should be in
x:\bin\acadfeui\setup.ini
not knowing the setup ini file of 2008
or places here, or try to delete in setup.ini style of 2006 references to netframework
setup_product_names=msi dotnet dotnetsp1 mdac viewer flash acad
e le righe[DOTNET]
product_name=.net framework runtime 1.1
install_cmd=support\dotnetfx\dotnetfx.exe
install_cmd_args=/q /c:"install /l /qb"
install_platform=win32
install_upgrade=.net
install_minimal_version=1.1.4322
[DOTNETLANG]
product_name=.net framework runtime 1.1 language pack
install_cmd=support\dotnetfx\lang\langpack.exe
install_cmd_args=/q:a /c:"inst /qb"
install_platform=win32
install_upgrade=.netlang
install_minimal_version=1.1.4322
[DOTNETSP1]
product_name=.net framework runtime 1.1 sp1
install_cmd=support\dotnetfx\ndp1.1sp1-kb867460-x86.exe
install_cmd_args=/i /q
install_platform=win32
install_upgrade=.net
install_minimal_version=1.1.4322.2032However if the installation of autocad goes to port and does not work autocad, just update the operating system with netframework

or attach the setup.ini file here

probably the rows and path of the ini file search are different, those I posted are of 2006, autocad 2008 has netframework 2.0.
then post all the setup.ini files by dividing them by paths and folders there should be at least 6 or 7

we change them here and replace them to yours

 

[liber]

mail here all the setup.ini files you find I didn't have time to change the topic and the 15 minutes have passed to be able to articulate it better
do not take into account the 2006 autocad routes, you should delete all references where dotnet is written, and dotnet lines

 

[mubert]

può essere utile il file di registro?

2010/4/7:19:48:08 hd-c pc-3 === setup started on pc-3 by hd-c ===
2010/4/7:19:49:05 hd-c pc-3 install .net framework runtime 2.0 language pack succeeded reboot is required
2010/4/7:19:49:14 hd-c pc-3 install directx 9.0 runtime succeeded
2010/4/7:19:49:16 hd-c pc-3 install mdac 2.7 succeeded
2010/4/7:19:49:23 hd-c pc-3 install autocad 2008 failed installation aborted, result=1603
2010/4/7:19:49:31 hd-c pc-3 === setup ended ===

 

[liber]

for me are netframework,
- or the disabled from your setup.ini
- or uninstall all netframework of your pc and reboot the installation
- or reinitialize your pc again

as you see on the internet with autocad you are not only having problems of 1603http://www.dotnethell.it/forum/messages.aspx?threadid=27325and here's an interesting site with your solution for another projected by me even if in a different wayhttp://www.dbcaditaly.com/it/licenze
why installing design review 2010 on win xp 32 bits receive error “0x643 internal error” and you can not complete the installation?windows update error codes "0x643" and windows installer error code "1603" are generic error codes and typically mean the update has not been installed. These errors are usually caused by corruption in the installation of .net frameworks or an inconsistent state of the msi database. to correctly install the update, uninstall all the versions of the .net frameworks present on the computer, then install them again (can be downloaded from the support site of the microsoft).can also be appropriate to clean the status of the msi database for all versions of .net framework. you can do by launching the windows installer cleanup utility. the utility is available for download in the microsoft download area at: http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe.

if you clean everything according to dbcaditaly.com I would recommend that you install the netframeworw directly from the dvd of autocad 2008 and after having configured the whole switch to the update if you need the frameworks to version 3.5

 

[mubert]

I followed what you said and I solved the problem, thank you so much

 

[liber]

I followed what you said and I solved the problem, thank you so much

ok please, but you did not say which among the proposed solutions you used and worked

 

[mubert]

you are right, I used the windows installer cleanup utility by uninstalling netframeworw, and reinstalling autocad, also reinstalling netframeworw from the installation cd.

 

[vespa_83]

I subscribe to the same error also for
installation of solidedge st2,
we try Monday the procedure described here.
♪

 

[franzyska]

hi, I installed autocad 2013 on windows 7, after following the above procedure described without result, disconnecting the pc from the internet.

 

[lattu]

hi, I installed autocad 2013 on windows 7, after following the above procedure described without result, disconnecting the pc from the internet.

Why did you have to disconnect your PC? is the problem being authenticated?

 

[franzyska]

the problem presented at the end of the installation. after several attempts I disconnected the pc from the network and restarted from the top, only after activating the product I connected it and it worked =)

 

[liber]

Hello, I installed autocad 2013 on windows 7, after following the above procedure described without outcome

the above procedure could be valid for the attempt to force the installation of autocad versions not so compatible with the operating system, that is an error during the installation, the error for the old versions is due to the fact that the operating system generally has the last version of netframeworw, instead the old versions of autocad have old versions of nerframework, the installation of autocad in fact previews an update of the net included
all this should not happen with win7 and autocd 13 because they do not recur the preceding assumptions, so the fact of disconnecting the network and that it went to good end, lets seize other things that I abstain from talking about, cmq your error you solved was another.