2010 e problemini .idw

[GiGa]

I have a couple of problems with inv. 2010 tables:
- by carving some multibody parts, one or more bodies are not brought to the table.. that the table is obviously incomplete... I didn't find any option that could fix. . bugs or hidden settings?
- exporting the table to .dwg, some views/sections are not exported. . .

Has anyone had similar experiences? possible solutions?
Thank you.

 

[davide75]

is it that they are surfaces?? ? The missing body appears in the table under every view? ?

 

[GiGa]

are not surfaces... typically simple extrusion or revolution processing. . .
even, I derived a part to get the speculation... the specular derivative is correctly carved, the original instead lacks a piece...

in the browser the processing in the list appears, but they do not highlight (obviously, being invisible) if they select.. .

As far as export is concerned, I discovered the ark... I simply flagged "export only geometries" (or something similar) in rescue options. . .

 

[pancinfu]

Hello, it is very much that I do not link, I hope you want to be friendly and available for a return unfortunately with the request for help with the inventor boards.
how to associate a table with a new part.
Thank you very much and I hope to be able to counterchange soon,

greetings

 

[Tarkus]

Hello, it is very much that I do not link, I hope you want to be friendly and available for a return unfortunately with the request for help with the inventor boards.
how to associate a table with a new part.
Thank you very much and I hope to be able to counterchange soon,

greetings

I don't think you have to post here, it would be better if you opened a new discussion.
Anyway:
What are you asking us? :

you have a table with the particular x, and would you like to replace x with the similar but not identical y?
or you're wondering how to make a meal.
Meanwhile, seeing that it could change the answer, specific that inventor release you have.

 

[pancinfu]

Meanwhile thank you so much for the disponibilty in closing an eye in my ignorance about the proper use of the forum.
the first hypothesis is what I refer to, I tried to use the project management tool but without results.
In fact, what I intend to do is to save a table with another name and then change the ref to a new part... this to avoid completely remaking the table.
Thanks again for the help.
inventor 2009

 

[Catafratto]

in the current version of inventor there is a special command, in the previous versions were necassari (as far as I know) add-in or macro, or a dirty removal of the type:
1) cover your table
(2) temporarily renounce the part/axis to which the table pointed
3) open the copied table and when it tells you that it does not find the original file, select the new one you want to refer to
4) reset the file name that had been modified

I think looking in the sdk was a demonstration program that did this thing; However, if it's a thing you have to do often, you should first copy with the design assistant table + model and then edit (always with pre-2011 versions, of course)
Bye!

 

[pancinfu]

scusa ma cos'é sdk?
dove si trova il command in inventor 2009. grazie

 

[Catafratto]

software development kit: however examples that install without need of particular attention. find the directory (I don't remember where inventor put it), in the readme you find the information. with the illustrated procedure you do before, I think... In inventor 2009 I don't know if there was internal command, I talk about an external program. now I have no subhand, tomorrow more info

 

[pancinfu]

ok thank you very much, I am trying to understand the management of files, with the creation of projects, the management of the projects.
Let's have a good wolf.

 

[stefanobruno]

I'm a wolf.

What is it?

:biggrin::tongue:

 

[pancinfu]

I don't know maybe I wrote bad, I connected with cell and something is missing.
If I'm wrong with using the forum, please excuse me.
I accept advice, thanks

 

[Catafratto]

più info:
help di inventor > guida alla programmazione (api) > cerca "sdk"

the inventor sdk includes samples and tools to demonstrate and describe the functionality that is available in the inventor api.

location of the sdk:

windows xp: <inventor folder="" install="">\sdk

windows vista: c:\users\public\documents\autodesk\inventor <version>\sdk

windows 7: c:\users\public\documents\autodesk\inventor <version>\sdk


il "copydesign" è negli usertools, se non sbaglio... non che lo trovassi efficente comunque mi pare facesse la funzione da te richiesta.
ciao!</version></version></inventor>

 

[pancinfu]

I have followed your advice to bypass the problem.
except the part with the new name and then I open the table and save it with the same name to associate the views.
however very useful the application to manage the projects and that for the management of files that emulates a pdm.
a greeting to the next