• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

2012 autocad problem with graphics card

  • Thread starter Thread starter cassero88
  • Start date Start date

cassero88

Guest
hi to all I bought autocad 2012 and I installed it on my pc a just taken hp that I was told to have the right features for autocad.my pc is an hp envy cn 8gb ram and a very powerful video card, arrival to the point.
installed the program no problem launch and activate the license then when I try to pull a line the pointer moves as to snaps preventing me from pulling precise lines.After a while tell me that the video card driver stopped working?
What to do? I need work
Thank you.
umberto
 
when I click on the commands size and extend the black screen appears and tells me that the amd card driver stopped funizonating and was restored
What do I do? ? ?
Thank you.
umberto
 
You could do a test: Look at the icons on the bottom right and look for the hardware acceleration. if it is disabled try to enable it. if the problem persists try to change vga drivers. I don't have any other advice.
 
Thank you very much for your advice I did so but the problem has not solved thanks really
umberto
 
re_solidworks said:
You could do a test: Look at the icons on the bottom right and look for the hardware acceleration. if it is disabled try to enable it. if the problem persists try to change vga drivers. I don't have any other advice.
Click to expand...
Dear King, thank you for your answer.
from the acceleration key I managed to open the menu that allows me to configure the video card and also updating the program itself and changing the number of colors of the screen works everything.
Thank you very much so you solved me a great problem
umberto
 
think I sent the pc in assistance I turned to a private and spent the beauty of 100 euros for a problem that I solved by crushing a button!
 
cassero88 said:
Dear King, thank you for your answer.
from the acceleration key I managed to open the menu that allows me to configure the video card and also updating the program itself and changing the number of colors of the screen works everything.
Thank you very much so you solved me a great problem
umberto
Click to expand...
nothing, as I told you in another discussion a little bit everyone here in the forum we have a collaborative attitude, I think it's the necessary spirit. sooner or later you need one of the others:wink:

I noticed that option when I installed mechanical 2012 as the performance was pitiful on a questioner fx 4800!
I also thought about the certification speech, but for the 2d autocad it was always good mouth.
cassero88 said:
think I sent the pc in assistance I turned to a private and spent the beauty of 100 euros for a problem that I solved by crushing a button!
Click to expand...
This is true, but for a systemist it is not always easy to distract in the midst of very different hardware and software....for this I always put my nose in these things when I delegate someone in my office.:biggrin:
 
I also have the same problem but I can't solve... I have a satellite toshiba p750
i7 2630da 2.00ghz
video card gt540m
4 gb of ram..

Could you please help me? ? I'm desperate for a delivery in two days
 
Jankx90 said:
I also have the same problem but I can't solve... I have a satellite toshiba p750
i7 2630da 2.00ghz
video card gt540m
4 gb of ram..

Could you please help me? ? I'm desperate for a delivery in two days
Click to expand...
apart from the previously mentioned advices I do not know. Have you tried to see both hardware acceleration and vga driver replacement?
 
hardware acceleration I tried to disable it but the problem continues. .
and I also tried to update the gt450m video card with the latest driver available. . I also updated autocad 2012 with the service pack but always present the same problem...I don't understand!
I also set in the nvidia control panel, the high performance "acad.exe" application by the dedicated graphics card (gt450m)

I'm desperate... even because the pc has 3 days of life! !
 
in the end I solved simply by changing the desktop background...I believe it is a matter related to the "aero" of windows 7...
 
I also have the same problem in autocad 2012 version students with the video card, unfortunately I do not understand much of computer and programs.. .
I put the hardware acceleration and the problem exists; I tried to update, but it tells me that I don't have permission to write the file; Can someone tell me how I can solve the probelma? Thank you.
 
@jankx90: what do you mean by windows7 aero?? I have your own pc and I have the same problem... Thanks :finger:
 

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Total: 1 (members: 0, guests: 1)
Back
Top