• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

advice and advice

  • Thread starter Thread starter DANUSIA
  • Start date Start date
you have to argue better your request.
is healthy habit when entering a place, whether real or virtual, as a form of education.
also thank at the end of the request is a welcome custom; from the impression that you respect the time that will be dedicated to the request.
Last but not least, a presentation in which you explain who you are and what your skills will serve to calibrate the answers.

education, respect and patience are the key words of a forum
 
Last edited:
ok ok if I was accepted so and you don't give me time, I delete the profile anyway thanks.
 
you have all the time you want to add useful information to solve your question.
sezna information is very difficult to give any help.
 
DANUSIA said:
advice and to start a 2d truck project for final examination.
Click to expand...
What you've done, as far as I'm concerned, with all due respect, doesn't make any sense. You'd better put out patterns, or argue in depth your problem, only so we could help you.
Bye.
 
good morning bizz because I am at first I would like to thank you for the help, I don't know how it works, it offended me , a little the lord massivonweizen because I missed a respect, I wanted to say that every forum has a regulation, the moderators can decide and write in the mandatory regulation of greeting what I did not see or maybe I did not find , and after I am free it is free to participate in all to this forum also healthy or healthy. Anyway thank you, I'll try to do what you recommended to me for the wagon and I will ask again thanks good day.
 
DANUSIA said:
Massivonweizen because I missed a respect
Click to expand...
Where? I have written the basics of social relations which, as in real life, are also valid in the network.
DANUSIA said:
moderators can decide and write in the mandatory rules of greeting what I did not see or maybe I did not find
Click to expand...
It's just education. as when entering a store or office.
DANUSIA said:
and after I am free it is free to participate in this photo also healthy or without healthy.
Click to expand...
Absolutely.
Regulation
 
DANUSIA said:
good morning bizz because I am at first I would like to thank you for the help, I don't know how it works, it offended me , a little the lord massivonweizen because I missed a respect, I wanted to say that every forum has a regulation, the moderators can decide and write in the mandatory regulation of greeting what I did not see or maybe I did not find , and after I am free it is free to participate in all to this forum also healthy or healthy. Anyway thank you, I'll try to do what you recommended to me for the wagon and I will ask again thanks good day.
Click to expand...
the "sir" in question has only remembered some simple rules of the forum, honestly I do not think it was his intention to offend. We are in a community, the rules make sure that there is such harmony so that everyone is free to feel in defect or at least superior, I respond to someone else.
 
DANUSIA said:
good morning bizz because I am at first I would like to thank you for the help, I don't know how it works, it offended me , a little the lord massivonweizen because I missed a respect, I wanted to say that every forum has a regulation, the moderators can decide and write in the mandatory regulation of greeting what I did not see or maybe I did not find , and after I am free it is free to participate to all to this photo also healthy or healthy. Anyway thank you, I'll try to do what you recommended to me for the wagon and I will ask again thanks good day.
Click to expand...
Bye. When you signed up, there was explicitly the rules to read. If you haven't read it, I suggest you read it. all in all the rules are those of a normal forum.
you say hello, you are presented (student, worker etc.) and you formulate the question clearly, with schemes etc.

I deduce that you are a student, high school or university if you come from what high school? (itis, classical/scientific high school etc.).
year project? thesis/tesina?
all these infos serve to calibrate what we have to explain and how.

I would say that as a student you can possibly use Eurocode 3 uni en iso 1993 in its various parts for carpentry and welding and bolting. Alternatively you can use the technical norms ntc 2018 that are free of charge. If you just don't want to use ex uni cnr 10011 that was withdrawn about 20 years ago but at school it seems to be obstine to use it.
In fact, in order to do proper professional work you should use harmonized standards and fem rules that dictate law from a lifetime. the wagons, as suits the lifting machines are subject to precautions because if it yields you die and it is a serious damage.
on the forum we have several interventions and similar posts from which to take stock.

regarding the main beam there is a very detailed and articulated post with calculations and simulations qui. normally the beams are pre curved to compensate for the bending.

then clearly there are other parts to calculate and dimension.
 
And nothing, we lost another one.
that ugly person I am, to point out that he shows up and greets himself... .
Perhaps next time I will have to prostrate myself and be I to thank to be so lucky that I can give a hand and even more fortunate than having to roast me to understand from a phrase striminzita what help you need.
 
MassiVonWeizen said:
And nothing, we lost another one.
that ugly person I am, to point out that he shows up and greets himself... .
Perhaps next time I will have to prostrate myself and be I to thank to be so lucky that I can give a hand and even more fortunate than having to roast me to understand from a phrase striminzita what help you need.
Click to expand...
Don't brash! education went to be blessed! But reading a lot of posts, they know me so much about "trolls," people who want to make a mess. For what purpose I don't know! Maybe it's the effects of this pandemic that besides the lungs harms the brains!
 
I was ironic. He was a bitten user and ran away, solved the problem would disappear.
if it were a troll would have persevered trying to take it to a caciara or writing astronaut things that imposed a minucious analysis of the text.
easier that it was someone without knowledge that thought to make and a chariot (maybe designing or just drawing. . we will never know) four lines with autocad and there was an answer ready to put on the table. read the ultramegagenic question to understand that there was no knowledge of cause
 
always in carpentry we find this debate.
then we have one of the qui.

learn to look for..... possible that you do so hard?

Sure that covid has worn out neurons a little by way of mechanics from virus riot and a little by situation stess. then unfortunately the average Italian does not seem to develop particular characteristics of acume and all the whole is transformed, adding maleducation to a failed experiment.

I am sorry to hear that. I see a general defeat. You don't have it and bad... but a bit of discomfort is coming to me.
 
MassiVonWeizen said:
And nothing, we lost another one.
that ugly bad person I am, to point out that he shows up and greets.. .
Hi, but I'm sorry, she has it with me that she keeps criticizing me back, giving me a bad person, she has to be careful what to write, because I didn't fail to respect you.
before you criticize me, think of yours. Good evening
Click to expand...
 
The shock is clear.
discussions that give value are less and less. and with value I mean those discussions that enrich both those who ask that those who respond because they involve more users who bring each of their experiences.
the almost totality of the discussions are now: on topics covered tens of times when or you lose time looking for similar discussions and making a list of them or you lose time to explain everything; requests in which to make sherlock holmes because who asks does not even know where to leave; dead discussions about the birth because the user disappears into nothing.
 
DANUSIA said:
Hi, but I'm sorry, she has it with me that she keeps criticizing me back, giving me a bad person, she has to be careful what to write, because I didn't fail to respect you.
before you criticize me, think of yours. Good evening
Click to expand...
Welcome back. I'm sorry to note that you read well that I wrote; the verb sleep is the first singular person and therefore refers to the narrative subject that in this sentence is subtle and I would be.
There is the possibility to report my abuse with the report button at the bottom of the message or by writing directly to moderators who will take measures in the event of a misuse.
We take a step back, I disappear from your discussion so I don't bother you anymore, you show up and expose your request.
good luck
 
Hello, I am alina, of origin I am Romanian, I would like to apologize for my spelling in case I am wrong to write Italian, I am studying for three months autocad 2d- 3d. I thank you very much, instead for that advice of what I needed. I try to do it alone cmq thanks.
 
DANUSIA said:
Hello, I am alina, of origin I am Romanian, I would like to apologize for my spelling in case I am wrong to write Italian, I am studying for three months autocad 2d- 3d.
I would like a tip to start a 2d carriage project for final examination.
Thank you very much
Click to expand...
Hello, Danusia,
Well, that was just what you had to say at the beginning and so many forum experts would help you.
I'm sorry for all the misunderstandings that followed.
I can't help you because it's not my job, but it accepts at least my sincere advice that you might need in your future profession.
If you want to have useful information, you must be smart in asking questions.
wishes for your exam.
 

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Total: 0 (members: 0, guests: 0)
Back
Top