advice on armor calculation

[Jachie]

Good evening to all, it's just that I've been working in the building industry, I'll tell you in a short time what I have to do:

my work consists in taking the dwg plans of the architect (in 2d) and drawing over these all the armor, then irons and brackets for audiences, sections, elevations, foundations etc...

after these, have in automatic all the distinct iron, with the various positions, lengths, developments etc...

I ask you politely, if you can direct me to the program that does better this job, I would like to eliminate the times for the distinct iron, and automate everything, also reducing the risk of errors.. .

I hope I have made the idea of what I have to do, I need a program that still leaves me the freedom to customize the tables and descriptions.

I use autocad 2010

thanks in advance to those who want to give me this advice

 

[meccanicamg]

Good evening to all, it's just that I've been working in the building industry, I'll tell you in a short time what I have to do:

my work consists in taking the dwg plans of the architect (in 2d) and drawing over these all the armor, then irons and brackets for audiences, sections, elevations, foundations etc...

after these, have in automatic all the distinct iron, with the various positions, lengths, developments etc...

I ask you politely, if you can direct me to the program that does better this job, I would like to eliminate the times for the distinct iron, and automate everything, also reducing the risk of errors.. .

I hope I have made the idea of what I have to do, I need a program that still leaves me the freedom to customize the tables and descriptions.

I use autocad 2010

thanks in advance to those who want to give me this advice

I believe that the technical report is still obligatory, so the calculations made must be visible, therefore done in manina and controlled with the programmes.

There are a tide of programs that make iron calculation in the reinforced concrete and make a distinct.

googuing a little there is everything, some only calculation, others make fem and modeling.

 

[Tristan]

if it is only design (without calculation) you can try autocad structural detailing.. .

 

[Jachie]

if it is only design (without calculation) you can try autocad structural detailing.. .

Thank you, I have looked at it and it seems exactly what it does to my case, I did not even know of existence, it would seem that there is only in English unfortunately, now I see to deepen

 

[GP.]

autocade structural detailing sembrerebbe "available solo con autocadit revit structure suite".
these are some autocad applications, you can download trials and try them:
emilisp c.a.
2dbeam
auto_c.a.
soficad-b armature
rcad

 

[Jachie]

autocade structural detailing sembrerebbe "available solo con autocadit revit structure suite".
these are some autocad applications, you can download trials and try them:
emilisp c.a.
2dbeam
auto_c.a.
soficad-b armature
rcad

If anyone knows which of these programmes is the most complete one, I will be able to assess the best.

thanks guys for the tips...