alignment views of different encumbrance

[rizzifrizzi]

Good morning.
Has anyone ever had to align a view to another even if, orthogonally, the sense of alignment, they occupy different dimensions?
I try to explain myself better. .
I have a view of a closed representation (e.g. closed cover) from which comes the various projected views that obviously have all the closed cover; Then I would like to show a further view always as the first but in open representation and align it in the table horizontally to the first as if they rested on the ground.
the problem that by default inventor aligns me to the center the two views when it would be much better to figure aligned the base of support.
is there any way you think you can recognize the alignment of 2 edges or edges between 2 different views?
bho I hope it is clear the question

 

[rizzifrizzi]

the left and central view (projected by the left) are aligned. If I draw an imaginary red line (ground level) I see that they are aligned. the view of dx that for obvious reasons occupies more space (because it has the open cover) if it gives the horizontal alignment to one of the two me aligns it but at the center of the total encumbrance. that you know, there is no way to give alignment to a reference? so that it can align it horizontally but on the same level ?

 

[Peppe]

try to make a superimposed view.
the main view will have "closed soundproofing" then superimposed view with "closed soundproofing"
in this way you see both conditions on one view but the view will be aligned correctly to the main view. If you want to have the view only with open soundproofing go to remove from the visibility the closed view on the superimposed.
I hope I've been clear

 

[rizzifrizzi]

Clear!

 

[teddy]

try to take a look at this video.
Greeting!

 

[rizzifrizzi]

That sounds like what I was looking for, I look better tomorrow.
Does the world of rules seem interesting? even if it is not yet clear how they work. Where are they? Who does it?

It seems you can really do everything with the rules but, for me, for now it is still extraterrestrial language.
teddy, I wanted to ask you something else, don't you think it's just temporary? , like moving it to position but it doesn't seem to bind it as the alignment command.

 

[teddy]

Yes, the views align them only temporarily, not being it a default inventor function.
in the video is used inventor 2021, I have no idea if this problem was solved in version 2023.
I recently use inventor, but from what I know the rules (called ilogic rules) serve to automate a process. the rules you can find on the forums from other people or create them yourself according to your needs. in doubt I leave you some resource on the codes, on youtube or google you find plenty.
I noticed that in the video there is no possibility to copy the code, so I leave you a link below where you can copy it.
Greeting!
click here for the code

https://knowledge.autodesk.com/it/s...ab9ee660-299e-408f-bbe1-afe44c723f59-htm.html