alternative a moldflow

[TECNOMODEL]

even in inventor there is the equivalent of plastic, even in this case with the limit of being integrated into the cad, so if you do not have it you have to buy it.
is still a simpler product than Moldovaflow despite the same softwarehouse.
I think the same goes for plastics

 

[Meteor02]

sure something in solidpast is missing even if I am at the ver 2016 and already had inserted several novelties (while I still do not know how to use it 100%) . I do not know well Moldovaflow but when they had thought to take it in the company I had given him an eye and seemed very similar to solidplast, the times I could compare my results with those of those who supplied me the warm rooms I did not find significant differences. In essence I would say that it is a valid alternative to low cost (solidpremium costs less than 7000 euros). only solid neo is that in mesch 3d with warp analysis employs the hardware for hours, in important projects letting it go all night in the morning still has not finished.. .
probably inventor comes out with a light version of Moldovaflow to swallow customers to take moldflow what solid does not have a paid version detached from solidworks, so it is used as an incentive to get the premuim version.

 

[TECNOMODEL]

it would be interesting to know what analysis can be done with solidplastic.

 

[Meteor02]

I don't use it at 100x100 but if you're looking for something in particular if I can answer you.
I use it as I said beforehand in the design phase of the particular to evaluate its printability any shrinkage and mold size according to the necessary tonnage, to identify the joints of material and gas storage points.
the mold we do it externally at a later stage once defined the article so I do not need to insert gas waste injectors etc., just indicate where and how to inject and make a verification.
I wanted to allegar you a relationship but also zipped is too big, if you care about something in particular maybe you place a screenshot

 

[TECNOMODEL]

I know Moldovaflow and I know it's very complete and sophisticated.
Of course, it is not a software for everyone, it needs solid knowledge of the molding to be able to interpret the results.
I was interested in understanding what is missing in solidplastic compared to moldflow.

 

[Meteor02]

driven by curiosity I asked autodesk that will be in parma to the mcspe. I will go to find them to evaluate the differences with solidplast, certainly the first impact has not been the best, you can not access the courses without first having taken the software (I will also sapro the cost but it is above 5000).
That is, they want me to spend the money before I know how much and if their program can make my life easier: (in addition I find that they have not available manuals in Italian.... at this point I expect the program to be extremely intuitive... I have been told about various versions of Moldovaflow and here too we will be able to understand what may be affectively superior to solidplast and what type of molds (the version adviser ultimate seems even lower)
, for now it seems to me to have understood that insight ultimate Moreover, it has the possibility to analyze the light refraction (useful for lenses and visors) compression molding and multiple injectors. I'll find out Saturday.

 

[TECNOMODEL]

driven by curiosity I asked autodesk that will be in parma to the mcspe. I will go to find them to evaluate the differences with solidplast, certainly the first impact has not been the best, you can not access the courses without first having taken the software (I will also sapro the cost but it is above 5000).
That is, they want me to spend the money before I know how much and if their program can make my life easier: (in addition I find that they have not available manuals in Italian.... at this point I expect the program to be extremely intuitive... I have been told about various versions of Moldovaflow and here too we will be able to understand what may be affectively superior to solidplast and what type of molds (the version adviser ultimate seems even lower)
, for now it seems to me to have understood that insight ultimate Moreover, it has the possibility to analyze the light refraction (useful for lenses and visors) compression molding and multiple injectors. I'll find out Saturday.

soooopra ai 5000

 

[Meteor02]

is what I understood from the phone call, talking to the commercial I told him I would want to do a course before I spend that I know 5000 euros and he also makes me + without entering the merit.... Did you spend less? or maybe there's a discount for the inventor? ? ?

 

[TECNOMODEL]

I didn't get it, I'm supposed to do simulations all day to go back to shopping.
the problem is that the other competitors are quite aligned.
I think if you already have solidworks and what you do is enough for your work makes no sense going to spend those figures.
as I have already written I do not know who can afford it, perhaps only large companies and builders of hot rooms.
Moreover, with the fact that they have eliminated permanent licenses is even worse.
Before you bought it, you didn't renew it for several years and you had a Mr. software managing to amortize it.
now having to pay several thousand euros a year for subscription as you do?
I would like to see some data, at my impression they had a remarkable decline in sales.

 

[Meteor02]

I knew you got it. for now solidplast there is more than suff but I have curious about the possibilities in more than certain Moldovaflow if I have to spend all that money before even knowing how to use the autodesk program sticks... At most when I need to do as I now decide everything with solid and I make sure to those who give me the hot rooms. we are still in solid 2016 if I propose in the company from me to spend 5000 euros so I am degraded to manual stamping officer or responsible for cleaning the floors

 

[barabotto]

I knew you got it. for now solidplast there is more than suff but I have curious about the possibilities in more than certain Moldovaflow if I have to spend all that money before even knowing how to use the autodesk program sticks... At most when I need to do as I now decide everything with solid and I make sure to those who give me the hot rooms. we are still in solid 2016 if I propose in the company from me to spend 5000 euros so I am degraded to manual stamping officer or responsible for cleaning the floors

who told you at the fair in parma.. ?

 

[Meteor02]

he talked about it a lot well but for the price will contact us the commercial and asking for differences with swplastic they have concentrated on the version Ultimate insights but I still have no idea the cost. confirmed that there was no availability to hold a course before the order

 

[TECNOMODEL]

he talked about it a lot well but for the price will contact us the commercial and asking for differences with swplastic they have concentrated on the version Ultimate insights but I still have no idea the cost. confirmed that there was no availability to hold a course before the order

did you then have contacts from the autodesk commercial?
what levels do you fly now?

 

[Meteor02]

I had a 1st contact after the fair, it is always around 5000 but now I have a cat attached to the .... try to appioppare from inventor to autocad, maids commercial as soon as they have a contact become bloody insistent.

 

[TECNOMODEL]

5000 years?
for which version?

 

[Meteor02]

5000 years?
for which version?

look nn I understood a bat should be the premium+a interface, but if you have other autodesk licenses come strong discounts on everything. we nn abandon solidworks, make us operational with another software would be further expensive.