amount in separate base

[MARCOC]

Hello everyone

as you can see from the image. . the as-002 axieme and present in various assemblies...how can I get the total quantity of one same together..I tried in various but I can not get it..si can you do? ? ?

Thank you very much

inventor 2011

 

[arzigogolo]

Hello everyone

as you can see from the image. . the as-002 axieme and present in various assemblies...how can I get the total quantity of one same together..I tried in various but I can not get it..si can you do? ? ?

Thank you very much

inventor 2011

Bye.

Of course you can.

I also happened to myself the same problem and I will tell you that it was not easy at all to solve it more than anything for the lack of information, but looking on the site of autodesk in English, in the forum "autodesk inventor services & support", I managed to find the solution.

in practice do so:

1) open the separate components
2) dx key and add columns: "category" and "mass"
3) add the "mass roll up" in the "category" column and copy it for all elements.
4) go to the list parts in the table and add the two columns created "category and mass"
5) dx key on "category" - column format - substitute - enable replacement - and choose "mass" as a substitute. in the casellin next to you put "summ of values", go under the same window and click "apps formatting drive".

6) "apply" and click "ok" .

At this point, if you did everything well, you should find the sum of total weight and total amount of your set.

If it is not clear to you, ask me, and I will see to be more detailed again.

In the meantime, look at this demo http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteid=123112&id=14078636&linkid=9242018 in the autodesk site that, even if a little in small explains all the procedure visually that I explained to you.

I'll get you an image of mine to show you how it comes out.

Among other things, that's what I did when I had your same problem and I had to figure out how to put total weight.

Bye!

 

[MARCOC]

great

I've been really helpful

Thank you.

 

[arzigogolo]

great

I've been really helpful

Thank you.

Of nothing, I'm glad you solved!:finger:

Bye.

 

[Peppe]

excuse but to sum the quantities what you have to write in the category column?

 

[arzigogolo]

excuse but to sum the quantities what you have to write in the category column?

Bye.

in the category column you have to write "mass roll up".

 

[Peppe]

ok works if I have to sum the weights, but to sum the amounts of assemblies as you apologize...?? ? in the pdf of marcoc, for example the as-002 axieme that is present both free in the main axieme and inside other assemblies. so to sum up the amount of the latter together or its components as you do? ? ?

 

[arzigogolo]

ok works if I have to sum the weights, but to sum the amounts of assemblies as you apologize...?? ? in the pdf of marcoc, for example the as-002 axieme that is present both free in the main axieme and inside other assemblies. so to sum up the amount of the latter together or its components as you do? ? ?

You don't have to do anything else. it automatically makes you the amount of the pieces as well as the total weight.

If you take a look at the image I posted at the beginning, you will be aware that, alongside the total weight box, in the "q.tà" column, it also appears at the total amount of all parts of the axiemi and subassiemi. in the image I posted, this total is 37. Take a look and see.

Hi.

 

[Peppe]

You don't have to do anything else. it automatically makes you the amount of the pieces as well as the total weight.

If you take a look at the image I posted at the beginning, you will be aware that, alongside the total weight box, in the "q.tà" column, it also appears at the total amount of all parts of the axiemi and subassiemi. in the image I posted, this total is 37. Take a look and see.

Hi.

I don't understand how in your image you can see the list of all elements or their numbering (1° column a sx)... then add them to the next column (37)...

for marcoc: if you have solved you could post a separate screen as from first post, but with the solution.
I am interested in the sum of the amount of parts/axioms that are inside others under axiemi or in the main axieme.
Thank you.

 

[arzigogolo]

I don't understand how in your image you can see the list of all elements or their numbering (1° column a sx)... then add them to the next column (37)...

for marcoc: if you have solved you could post a separate screen as from first post, but with the solution.
I am interested in the sum of the amount of parts/axioms that are inside others under axiemi or in the main axieme.
Thank you.

Bye. the program shows you the list of all the elements that are subjected to "somma" and makes them appear automatically by virtue of the procedure I described above and that is according to the creation of the column "category" indispensable to "make you understand" to the program that I want the sum of the elements and their weight and to the substitution, in table mode, of the column with the column "mass".

When you issue the list parts in the table, you must add the column "mass" click with button desto > "plate form" > then "replacement" > "replacement ability" > in the box below choose "mass" > in the casellin next to choose "values sum" > and finally click on "apply formatting units and choose ok.

the game is done!

It is precisely the "ability to replace value" that makes sure that you find yourself with the sum of the quantities of the individual elements, (in my case 37), qunidi you find yourself both with the amount of the individual elements, and both with their sum!

important: the sum of the items you get, is referred to the main axieme and to All the others under assemblies. therefore it is complete!

the screen of the "different parts" is useless to post, because the solution you will never see with the command "different components" in the mode together, but you see it in the mode put on the table, like the one I posted.

try to follow the procedure in the link I posted at the beginning, there is explained everything. then if it's not clear to you, I'll put a screen in the list in the table.

 

[Peppe]

the screen of the "different parts" is useless to post, because the solution you will never see with the command "different components" in the mode together, but you see it in the mode put on the table, like the one I posted.

I meant the separate components in the table

 

[Peppe]

maybe in the procedure you didn't say that you need to make a "group tax", only now I watched the video in the autodesk site where precisely explains the procedure.... now it works

 

[arzigogolo]

maybe in the procedure you didn't say that you need to make a "group tax", only now I watched the video in the autodesk site where precisely explains the procedure.... now it works

You're right, I forgot the "group tax" pass. Anyway I'm glad that looking at the procedure, you managed it too!:finger:

I also had to have a little pain in order to understand the procedure at first, then I managed, but it was not immediate.
Besides, if you do it, in the video you jump the passage to hide the column "category" as last step before clicking on ok, since that column only serves the program to calculate the total amount, then you can also hide it.

Bye.

 

[MARCOC]

Hi.
I was referring to the fact that so I managed to brass the total weight of the axieme.. but in fact my problem does not lorista as I can not brass only the total sum of the axiemi.. it can be done only for the axiemi equal but at the same level of distinct. . .

 

[Peppe]

Hi.
I was referring to the fact that so I managed to brass the total weight of the axieme.. but in fact my problem does not lorista as I can not brass only the total sum of the axiemi.. it can be done only for the axiemi equal but at the same level of distinct. . .

to do what you want, you could try to put the assemblies inseparable, and the parts that make it in purchased. then from the distinct "only parts" you can see the quantity of assemblies and the parts added also in subgroups

 

[Sleepers]

In the meantime, look at this demo http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteid=123112&id=14078636&linkid=9242018 in the autodesk site that, even if a little in small explains all the procedure visually that I explained to you.

update after three years: the link above no longer works, I found this (with search key "mass roll up"):http://knowledge.autodesk.com/suppo...-total-mass-to-the-partslist-in-inventor.html

 

[arzigogolo]

update after three years: the link above no longer works, I found this (with search key "mass roll up"):http://knowledge.autodesk.com/suppo...-total-mass-to-the-partslist-in-inventor.html

thanks to the sleepers link, always useful in the case of forgetting the steps or a refreshment, since it is not really of immediate understanding. :smile:

 

[DilanDesign]

Hey, guys!

I tried by stepping up your directions but obviously I mistake some passage.
more precisely I managed to view all the weights in the cartouche, but if I wanted to do the total as I do? to understand me would serve a result just like the last image of the link posted by sleepers, where in a column you get the total mass. help!

 

[elkatta]

Hey, guys!

I tried by stepping up your directions but obviously I mistake some passage.
more precisely I managed to view all the weights in the cartouche, but if I wanted to do the total as I do? to understand me would serve a result just like the last image of the link posted by sleepers, where in a column you get the total mass. help!

the basic idea is to give a common field (an iproperties type category) to the objects of which you want to make the sum (in the list parts of the table); if you do it for all the parts and assemblies of the group that I am putting on the table I would get the total weight (but it would not make sense to do so since it would coincide with the "mass" iproperties of the assieme); after you group the rows of the list parts using that common iproperties. in the list parts you put the mass field: if you leave it standard you will see the sum of the single item or row of the list, then by right-clicking on the column mass you impose a replacement with the "mass" iproperties but instead of using the first value you say to sum the values of the group.

the sum of the masses or the quantity is valid only for the elements of the group (and of the first level therefore), is not a sum summarized of all the instances of the same object within subaxiemi sons of the assieme that we put on the table.

 

[batleo]

Hi.
I thank you for the instructions and it works but they are with the created parts, but not with the components in the library because it does not add the custom colon, should I put that item in the components and put them back in the library?