another problem on file renaming

[Mocca]

Hello, everyone.
I do not think I have found anything specific already dealt with in the forum so I explain the situation.
It is clear that the name of the file of the “part” is not linked to the inner name of the “part” and that in a “product” is seen only the internal name.
at this point the problem: I have to rename all the files of a product in English (about 600); and all right, I harm myself of sound patience and I carry out the work renameing everything from the explorer of windows but when I open the total assembly obviously the name of the part remains unchanged.
question: Is there a way, a macro or some diavoleria that automatically aligns the name of the file with the inner name of the part and that at the same time in the product are kept all links obviously without opening each single file and rename the inner part again?
thanks in advance to all those who can give me an answer.
we waved

 

[Mocca]

...toc toc...:frown:
Has anyone had the same problem or have I not been clear or can no one give me a negative answer?
Come on, I'd live.
we waved

 

[mcbramby]

to do what you want to do, I think it takes a macro that reads the name of the file and puts it in the name of the part............... .
You should ask those who sold you catia and definitely (for a fee) do it.
if you do not want to spend or do not know who to ask armed with patience and change names one by one.
My advice is to never use explorer to do anything in the cat on file names you might lose links to product,
always uses cat rescue management to manage file names.

so if you have a set that includes all the files you should open the product and in the tree you have all the files, from saving management change the file names
and from inside the axieme in the tree taxto dx property, on each part, change the names of the part................. I know it's a menata......... .

I hope I understand what you asked......... .

 

[Mocca]

thanks mcbramby for the answer.
by explore I meant the "saving management" window that I have used for a long time while the pocedura that I recommend is just what I am already using but... It's crazy. at least for the celebrations I am using the pacth that kindly someone made available and that I am using (I take the opportunity to thank the one who created it and made it available to everyone).
I do not understand however this logic of catia to "seat" the name of the part from the name of the file I find it absurd, useless and Moroccan.
I will try to ask the cat dealer if they have any ideas or solutions regarding the problem even if I have to admit that I have found more aid in this forum than from them.
thanks again and good work

 

[mcbramby]

thanks mcbramby for the answer.
by explore I meant the "saving management" window that I have used for a long time while the pocedura that I recommend is just what I am already using but... It's crazy. at least for the celebrations I am using the pacth that kindly someone made available and that I am using (I take the opportunity to thank the one who created it and made it available to everyone).
I do not understand however this logic of catia to "seat" the name of the part from the name of the file I find it absurd, useless and Moroccan.
I will try to ask the cat dealer if they have any ideas or solutions regarding the problem even if I have to admit that I have found more aid in this forum than from them.
thanks again and good work

thank you for your thanks............ I think it's my macro (I didn't do it) but it's what I use, and I feel like I put it in the forum.
if you want cmq to make the macro x why you need....... send me a private email and I will contact you with our supplier definitely (for a fee) they will make you.......
However try to look in the options if there is any flag to activate to match the file name to the part name

 

[mcbramby]

I wanted to add that cmq catia reasons so namepart = file name , but only with new files ........... .
If you create a new birth and change the name part you will see that the rescue offers you the name of the childbirth ................. .
Obviously it does not have logic if the file is already saved............ :wink:

 

[marcofa]

http://www.cadpart.com/index_en.htmhave the cat.save.managment program to do everything on part number, instances and file name.
free up to 20 part/product
a month full license free
cost 950e + 150e/year

Mar

 

[peloritano]

I'll make a macro, but it's eternal.

 

[marcofa]

if you were of good heart you could make a small macro that changes the part number and places it = to the filename that you operate on part and product simultaneously and on multiple levels.
I found some on the web that only work partially or do not work.
If you want, I can post them so that you can help us in your spare time.
Mar

 

[peloritano]

mail

 

[marcofa]

in each zip there is the macro and a txt file with instructions and comments
good work and good weekend
Mar

 

[marcofa]

have the cat.save.managment program to do everything on part number, instances and file name.
free up to 20 part/product
a month full license free
cost 950e + 150e/year

tips and tricks
monthly license always valid retrodatando pc

 

[peloritano]

Hello everyone.......... Sorry I'm late but work commitments took away a lot of time......... I hope I understand your needs well, but if it had any problems, let me know that I'm putting things right... I'll ask you some questions about the problems I've encountered so I can make this macro even better and with new functions...
x marcofa... use it and tell me if it was what you were looking for.... .

 

[micknat]

Hello everyone.......... Sorry I'm late but work commitments took away a lot of time......... I hope I understand your needs well, but if it had any problems, let me know that I'm putting things right... I'll ask you some questions about the problems I've encountered so I can make this macro even better and with new functions...
x marcofa... use it and tell me if it was what you were looking for.... .

Hello everyone,
I should re-encode a complete plan of boards (a thousand codes) and for this I downloaded these macros but I still had the courage to try. . .
hairy, sorry, but in the rar you posted, you need to enter a password... Could you please let me have it? Is it possible?
Thank you very much.
Greeting

 

[peloritano]

the working macro

 

[caio_masse1974]

Hello everyone,
I should re-encode a complete plan of boards (a thousand codes) and for this I downloaded these macros but I still had the courage to try. . .
hairy, sorry, but in the rar you posted, you need to enter a password... Could you please let me have it? Is it possible?
Thank you very much.
Greeting

hello would have the password, thank you