autocad batch

[volaff]

Hello everyone, I am a neophyte of autocad; so far I have always printed from a model already "pre-compiled" consisting of different layers (style "fog" of excel to understand us) and the batch printing happened without problems

the pc on which I worked was formatted and since then the batch printing gives me problems.
some lines go out more thick than others and so on.

would you tell me where to go to get, for example, all the white and black lines and some thickness in the print for all worksheets?
If I put a sheet, it doesn't report the changes on the other sheets.

I apologize if I was unclear.

 

[MassiVonWeizen]

for printing are used ctb that identify the thickness of lines by type of color.
there are also other methods of setting the line thicknesses, but that I used little and so I can not explain them well.
How does a ctb work?
ctb is assigned in print phase and is not included in the drawing, but in the printer setting
to each color are assigned different settings including: color, line type, line thickness... .
we start by saying that the yellow color (2), green(3), magenta (6) have an identification number, those written in brackets, which you can see in the color palette of autocad. colors are 255
for example if your outlines are on the yellow color to the ctb you will assign to number2 a 0.4 thickness and black print color; If the axes make them blue you will check to the blue (identifier 4) a thickness 0.2 and color of black print, if the writings the dark green dots corresponding to 119 and you want them to be printed with that color you will assign to the identification of the ctb the thickness 0.3 and color of print 119.
I may not have been very clear, but I hope I have at least addressed you well