automatic printing drw

[lollone]

Bye to all,

sometimes they come back...it's been a while!! !
I find myself having to cuff on pro/e, indeed now on creo!

we often have to print pdf drawing lists (about 30 tables).
I wanted to understand if there is a way to facilitate the operation without having to open the drw and print them one by one.
There were already discussions in the past but I couldn't understand much. . .

 

[StefanoAntonio]

I use wf4.

if you mean how to print many pdfs, I use foxit reader (it is a free program), I open all pdfs that interest me and I put them all in one shot.

While you mean how to open in a blow only 30 .drw, this I think there is no function of proe that does it (at least in the wf4)

 

[calacc]

Bye-bye
if to print you intend to export from drw to pdf you can do what you ask by setting creo distribuited batch.
Is that new name?

 

[lollone]

Hi calacc,

Unfortunately I do not know creo distributed batch.. .

 

[calacc]

Okay, it's really simple to set it up, if you want, I can help you out.
Meanwhile you have to see if you have installed it:
Do you have a qs icon below on your desktop or in the boot menu?

 

[DANI-3D]

Hello everyone
I'm very interested in it, but does it work with wf5?

 

[calacc]

Hi.
Yes, I think so, you simply will have a different name topo pro distributed batch

 

[maxopus]

I confirm, it works with all versions and not only for printing.

 

[lollone]

Yes, I have the icon!
If you help me, you'd like me.

 

[calacc]

ok, click create new group of operationsI to do qs work use function pdf drw multi page exportclick on the folder to add your drw files to export to pdf blockthen add a configuration file for export (a config.pro is sufficient where for example the axes dots are switched off etc... otherwise you print them all)in the outputs choose the position of the exported designswhen all this is completed exit from create parametric (qs program requires a free license to work), click dx on the new group of operations, then startNow go drink coffee, come back and then let me know what happens:

 

[lollone]

drinking coffee and pdf created. I am not created, however, all layers and tables.

 

[DANI-3D]

Sorry, but I stayed behind, I didn't even find the icon. Where should it be?

 

[lollone]

You probably didn't install the module. you must add it from the installation cd.

 

[DANI-3D]

My softerist tells me to have it installed in his time. If it were true where the icon should be? in wf5 of course.

 

[lollone]

ptcdbatch.bat on installation folder

 

[DANI-3D]

ptcdbatch.bat on installation folder

I didn't find anything, I'll try to install it.

 

[calacc]

drinking coffee and pdf created. I am not created, however, all layers and tables.

probably depends on the export settings related to pdf, or the pens table you use...

 

[calacc]

I didn't find anything, I'll try to install it.

dani when installing remember to put the tick on creo distributed services

 

[lollone]

probably depends on the export settings related to pdf, or the pens table you use...

but what configuration file do you load?

 

[calacc]

my standard config.pro, I still activated settings related to pdf