background color configuration for pro/e wildfire 4

[raffaele1985]

hello to all; My name is raffaele use pro engineer 4.0 for a couple of years.siclike I have changed company I have a problem with the initial confugration of pro engineer , i.e. the settings that interest me I changed but the inizal color of the sofndo to every attempt of opening the program is gray (default) I wanted to know how canure to load the color setting... thanks in antcipo

 

[calacc]

system_colors_file option of config.pro:
you have to give it the path to the color setting file syscol.scl that you created earlier.
If you don't have it, first settle the colors you want and then expose it to a syscol file.

I'll train you as an example, I hope you can be useful, hello

 

[raffaele1985]

system_colors_file option of config.pro:
you have to give it the path to the color setting file syscol.scl that you created earlier.
If you don't have it, first settle the colors you want and then expose it to a syscol file.

I'll train you as an example, I hope you can be useful, hello

Thank you very much for your help. I would have much more to ask the community also because I have other to change for example in the together when I add the parts I would like to remove that red dotted line that appears when they select the plan or the point etc... etc... etc... I would like that in the 'model tree where there are the assemblies and the parts there is the + sign on the parts in order to be able to change in real time the quotas I would like to enable the click of the selection. . mannaggia to me that I have copied the old config.pro (I changed work) and nn I thought and take the already set (not from me)

 

[maxopus]

Thank you very much for your help. I would have much more to ask the community also because I have other to change for example in the together when I add the parts I would like to remove that red dotted line that appears when they select the plan or the point etc... etc... etc... I would like that in the 'model tree where there are the assemblies and the parts there is the + sign on the parts in order to be able to change in real time the quotas I would like to enable the click of the selection. . mannaggia to me that I have copied the old config.pro (I changed work) and nn I thought and take the already set (not from me)

Did you nail the caps lock?

 

[raffaele1985]

Sorry about ignorance, but what is caps lock?

 

[raffaele1985]

Sorry about ignorance, but what is caps lock?

ahahahaha didn't happen this..... I liked it

:smile:

 

[raffaele1985]

Hello to all I would have a help (for the last time)
I would need to eliminate in the assemblies of the parts that annoying line dotted in red when they select the plans or points etc...etc... when I besiege.
I would like that in the model tree there was the + sign near the parts to be able to change the odds and other in the together (without having to open the window of the part to be changed)
I would like to enable the click of the wheel as confirmation
I am interested in three aunts I thank you in advance who helps me!!!:finger:

 

[maxopus]

I don't know if I can, tomorrow morning something will come out.
In truth, many things already exist on the forum, with research you should do it.

 

[calacc]

Listen to me, it's a month away from Christmas, okay? but does this look like the place to write the letter to santa claus?? ? I would, I would, I would, etc.
First of all, calm down, then try to use the search button and many things you will solve it from you! If you're working with pro/e for two years, you won't have much trouble retracing the winding path of reconfiguration! I know but it takes patience. .
If then there are difficulties we are here, but you cannot answer everything in a single discussion, otherwise you know that chaos... It's better to post a topic at a time in the right sections. The configuration section is also the first thing I would look for there! then if I don't find the answer that satisfies me then, okay?? I trust in your collaboration:finger:

 

[raffaele1985]

I know that I have managed to modify them thanks cmq for the collaboration and patience: