binding a rat

[VigZ]

I really have doubts about how to do...

the green flywheel is commanded by a biella that mounts on the spherical snode in grey.
his bike is about 90°, it is represented in the 'advanced' position.
the ratchet is pressed on the purple disc through a spring fixed to the orange pin, in the bike then, back, hooks a field of the purple disk and rotates it forward.
I mean, a rat. .

How do I hold the hatch in place?

I already have the contact group to give him the bike forward when ungrateful.. .

 

[Ilario]

I didn't understand the doubt about what you did...

 

[VigZ]

keep the rat in touch with the disc...

 

[Ilario]

I actually see it hard....

 

[cacciatorino]

How do I hold the hatch in place?

I do not know inv, but it would be possible to create a surface Continue that copy the profile of the cam and then impose a cam bond between the hatch and the above surface?

 

[VigZ]

I'm trying. .

 

[diegus]

I saw that you have simulation, in that environment you can set spring for the elastic return of the stick on the disk and then a 3d contact to slide the same. in normal inventor there is no way.

 

[VigZ]

I was looking for a suitable solution for suites... :