bombed funds

[presariog]

Bye to all,

as you would face this situation, I should get the dxf to be sent to the cut of reinforcement of a leg in tube tondo de 300 sp 6. welded to a decinormal bombed bottom of 3000 sp 15, the reinforcement flange around the leg for 100mm sp 15mm the leg is from the bottom center 1300mm

 

[MassiVonWeizen]

that red sketch in rotated view does not clarify at all what you want to do. What would be leg?
make a table with canonical views and draw with sketch this reinforcement.
attach the file
uses punctuation that is a difficult to read request.

 

[presariog]

here are the files
greetings
omen

 

[MassiVonWeizen]

here are the files

that obviously is not in 2012...

 

[presariog]

I only have this version 2017 ....

 

[MassiVonWeizen]

then would be the case of updating the profile

Anyway, would you like to get something like that?

 

[presariog]

Yes, that it can be flattened to cut plasma, and with the calandra and the bending machine give a form that best fits the bombed bottom. often, between the collar (vertical and the bombing there is a narrower connection radius, but still a flange similar to the green part.

 

[MassiVonWeizen]

You can't flatten it.

 

[presariog]

thank you so I have confirmation.... at least stop trying....

 

[volaff]

I create that you can't flatten it (intendo sheet mode) because it's a curved shape.
correct me if I said a chestnut.

 

[MassiVonWeizen]

It's a half-crown.
a form that has curvature in one direction can be flattened. The process is called rolling.
a shape that has curvatures on several directions can not flatten it if not making exhaust cutting is to the bending approximate the radiation (this in workshop, on solid I do not think it is possible). the process to get such an object is pressing

 

[volaff]

I meant using the software not a processing process

 

[MassiVonWeizen]

I explained how in the workshop you can get a similar result for approximation without having to use expensive processes.
with solid you can not flatten it and get the dxf.

is the same as orange peel

 

[Utente cancellato 70856]

if the drawings as surface then you can flatten it http://help.solidworks.com/2016/italian/whatsnew/t_flatten_surface_enhancements.htm

 

[MassiVonWeizen]

Did you manage? Could you attach an image?

 

[Utente cancellato 70856]

the function of flattening of the surfaces entered in sws in the 2015 version and I stayed back a few years, but I can post a link of a page of grabcadhttps://grabcad.com/tutorials/how-to-flatten-a-curved-surface-in-solidworkswhere you can see how the visor of a motorcycle helmet is flattened

 

[MassiVonWeizen]

My doubt is not about the function itself, but that can flatten the detail that has a completely closed geometry.
definitely also to make an unpublished piece it takes a development of departure, but by memory (and why I never work with the surfaces so the novelties that concern them do not remain imprresse) I seemed to want the package logopress.
Maybe who has 2017, version in which the file is made, can do some tests and illuminate me