by inventor to print3d

[mir]

Hi.
Wherever I have never printed 3d so I come across things that might be trivial. I have an axieme iam file consisting of hundreds of pieces... of the size of about 7 mt.
now I would like to create a "game" of about 20/30 cm removing those that are the smallest pieces.

What road do you recommend to take?

Thank you.
♪

 

[TECNOMODEL]

you have to create a single solid, scale it and export it to .stl and then print it.

 

[mir]

Okay I get it... but if I have a drawing too precise how can I simplify it?

 

[TECNOMODEL]

you can try with the "simplify" command, but it doesn't work very well.
Otherwise you have to delete, close and join until you get what you want.

 

[sam.bb]

Hi, mir,
Be careful when you carry out stl because inventor as default uses cm! also raises the resolution and make sure that once scaled the features have a thickness of at least 1mm.

If you want to know how much it will cost to make it in 3d printing. you can take a look at our Instant preventive.

I recommend mjf technology and pa12 material.
Let me know if you have any further doubts!

 

[mir]

Thank you... but my set is too complicated... I had to give up...