cam su siemens 810m

[gian_gm]

Hello everyone are new to both the forum and regarding software cad/cam... work in a small workshop of mechanical constructions and I learned to program a working center controlled by siemens control 810m only from machine edge and therefore I would like to view programming through cad/cam... together with the machine I was provided with the software bobcad v20.4 with its postprocessor but I have no clear idea how it works if any of you could help me or give me advice maybe on using other software I would be grateful.
hello to all:smile:

 

[Shrek]

I hope they have also provided you with the bobcad manual, usually with the program there is at least pdf documentation, at least in English.
otherwise try looking for something on the net.
coarse cad-cams all work in the same way, that is, from the design executed to cad (or imported) a path per cn is extrapolated, unfortunately in the specific are all different, like cn so much to understand (they all do the same but with different methods).
if you have the manual with some example it takes little to learn at least the basic notions.
The only thing you need to control is that the postprocessor is optimized for your cn, so that you interpret it without errors, otherwise you do very little.
in the end you just have to load the iso into the cn, you can use the rs432 cable from the floppy, etc...
810m seems to have only rs432 as a device.