• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

catalogo party

  • Thread starter Thread starter Joshua662
  • Start date Start date

Joshua662

Guest
Hi guys I open this discussion to know the fastest way to create a catalog with my custom minute, I explain, today as I am forced to draw every single piece that makes up my own product that goes from the first piece to the fine screw, sometimes I use the web to find components that would make me comfortable to have, but you lose a lot of time, I would like to know if there is a tutorial or a guide to build a customised catalog, I make thirteen if I find it step thank you for every answer, I offer my most cordial greetings....
 
I'm not wrong tequila só use both software discreetly now I work for a company that uses catia v5 but every time I have to talk to the cad manager I do first to get to fatima round and back on foot that have an answer to an email that I send to him, so other authoritative sources I find only here....
 
Joshua662 said:
... but every time I have to talk to the cad manager I do first to arrive at a great return on foot that have an answer to an email I send to him, so other authoritative sources I find only here.....
Click to expand...
It's the second time I read about the cad-manager that doesn't make a c...o!
We stand with another parasite.
But the company doesn't notice? ? ?

However returning to your question you have the opportunity to create a catalogue.
the extension seems to me to be .catalog
in the web search manuals .catalog

we use partsolutions of the cadenas and we find ourselves well.
the application works well

if I do not err there would also be tracepart
 
Falonef, you were very kind, and what are you doing? Unfortunately the companies of low Italy are all so.... I am little that I work here but there are many others that do nothing and that in the end take good money..... I since October I wait a new pc what I use is a workstation xw8200 but with characteristics of a pc home, you think I have a set that you are no comes to 50 pieces and loses half day to load it.... we wait with patience.
 
Unfortunately the companies of low Italy are all so....
- No, the other parasite was deep north...! ! !

if already to load a set with 50 pieces you put a lot, I see it hard to use a catalog.

Also creating your own catalog, you are trying to reinvent the wheel.
browsing the catalogue is not the maximum and the search functions are limited

for this type of thing there is web or partsolutions or traceparts applications.

I give you advice, then you see what to decide
 
falonef thanks for your advice, and I accept them very gladly, but unfortunately my pc work is not online and to write to you I do it through personal ipad, second thing I can not download anything from the network because not connected first and then for business reasons nothing can be downloaded here the need a catalog on the machine, then even if I could download from a pc not company connected via web through key I can not use it on the company pc because it blocks the copy is in thank you anyway.... in all the ways table project connected to the part but when I go to create the catalog tells me that in the table missing a column partnumber but there is only that it is called number of part because catia is in Italian.... mha..... I hope to get out.... thanks many... .
 
ok, post in the forum and you will see that from time to time some of us will help you.

Of course, working like this makes you feel like you're doing as much experience as you can and then you're flying off:wink:
 
are another two years of suffering then I go away... I need this time to finish studying the evening class of mechanical expert at the industrial technical institute, then my dream and come to work on the north where the realities are better or in Swiss.... thank you very always kind and precise in your answers... .
 
Having the luck of working within plm, I put my experience in the forum.

what you sow, collect.
 
and of this we little mortals we give you thanks is important for us to feel the presence of a mentor who gives you a hand when more you need it.... a greeting and soon and thanks for the help... ps in all ways I managed to make the catalog, I already inserted half of the screws of iso 4762.... the rest with calm and patience.... thank you for everything.. .
 
Good morning to the cad3d community I write this message to ask for delucitation on my project.... I explain to you:

I have taken the catalog of the bossard minutery from there I am extrapolating my catalog for catia, but there is a doubt that it abstains me besides the norms iso and one present in the catalog there are also the norms din according to you it comes to put even those or better to put only iso and one?
My doubt is that I have regulations that say this: cylindrical head screw with recessed hexagon, partially threaded reference standards din912, iso 4762, uni 5931. In this case it tells me that the rule din 912 is in ISO 4762 and in one la 5931, right not? but if I find that din 6912 has no references in the iso and neither can I delete it from my catalog?
thanks to all those who will answer me.
 
Joshua662 said:
Good morning to the cad3d community I write this message to ask for delucitation on my project.... I explain to you:

I have taken the catalog of the bossard minutery from there I am extrapolating my catalog for catia, but there is a doubt that it abstains me besides the norms iso and one present in the catalog there are also the norms din according to you it comes to put even those or better to put only iso and one?
My doubt is that I have regulations that say this: cylindrical head screw with recessed hexagon, partially threaded reference standards din912, iso 4762, uni 5931. In this case it tells me that the rule din 912 is in ISO 4762 and in one la 5931, right not? but if I find that din 6912 has no references in the iso and neither can I delete it from my catalog?
thanks to all those who will answer me.
Click to expand...
Yes, the din912 corresponds to iso 4762 or uni5931. in its time the codings with the uni5931 and still remain so. I don't pose the problem as if I order them to my supplier know exactly that they correspond to the iso... or din... if I have to encode another minute if I find the references iso I put those, if there are not put those available, din, uni, etc.

Why do you have to delete from the catalogue? It is not that being normalized iso does not exist or is no longer produced. refer to the rule that you find point.
 
thank you for the answer tequila ok I do as you suggested to me... Thank you immensely. . . .
 

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Total: 0 (members: 0, guests: 0)
Back
Top