catia torino course - advanced

[pritio72]

Good morning to all,
torino there is this 80h course faked in part from the region - http://www.fortechance.it/corsi/grafica-e-cad/2882/tecniche-di-modellazione-di-superfici-con-catia
The programme is as follows:problems related to manufacturing processes:
multimode environment
cad techniques for three-dimensional design
creation of surfaces
control tools
creation of references
surface operations
3d curve creation
assemble surfaces
final test

My question is this: currently use solidwork for modeling both as solid and as surfaces; years ago, I had been doing a catholic course since 80h.
I was willing to do this course but can it be worth it?
the way of working with catia on the surfaces is very different from that of solidwork.
until 3 years ago I used pro-e and the surface module I used it.
If anyone can give me some suggestions, I'd be grateful.
greetings

 

[Mark87g]

This is about a voucher. Can you tell me exactly what this is about? the course should start in November, correct? Do you know the days when it starts?

 

[pritio72]

This is about a voucher. Can you tell me exactly what this is about? the course should start in November, correct? Do you know the days when it starts?

hi the voucher are funds that the Piedmont region offers to make courses. practically the cost to the end user is around 180€ while the rest is faded from the region.
I can't tell you when it starts... they still need to get to the class.
greetings

 

[Mark87g]

hi the voucher are funds that the Piedmont region offers to make courses. practically the cost to the end user is around 180€ while the rest is faded from the region.
I can't tell you when it starts... they still need to get to the class.
greetings

but if a person is not Piedmont, he can do the same course. I, for example, am not Piedmont. Could you give me some additional information on what to do to participate? Is there a chance for you? I hope you can give me some more information. Good-bye.

 

[gianni55]

Hi.
I think it would be useful to ask the institution that promotes the course an in-depth study of the points dealt with, in order to better understand if the topics can be useful for the work that you currently carry out (or for a possible change). I do not exclude that an approach to catia can be carried out in an 80-hour course (as long as faced by those who are not fasting and who continue to practice), although I still think they are few. much depends also on the teacher, whether he is a theorist or comes from the water supply. If you need some more info, ask yourself, I'm toast.

years ago

 

[Mark87g]

Hi, gianni, thank you for your message. In reality I would go looking for a caty race that is exclusively practical, otherwise if it is theoretical I do not need anything. if by chance if I know of some well structured course (possibly cheap and however cheap) I would like you to inform me. Torino, by the way, is really great as a place because I have a support. 80 hours are few is true, but this is true always. then, with the practice continues and with the hard work you get all the results of this world. But you have to start with good bases so that you can be autonomous. thanks for the message.

 

[gianni55]

hi mark, I absolutely do not want to denigrate the training courses held by the various external agencies, indeed they have excellent validity especially for those who start, but when we enter the merits of an advanced course (the one we speak of) it is preferable to ask for more clarifications to those who provide them. On the basis of my experience I have found that the best results are those obtained by a teacher who is part of the company itself that establishes the course and who consequently knows the needs and the problems, in this way the deepenings are targeted and not generic. I do not share your search for an exclusively practical course, as I think it also serves the theory, my reference to the teacher simply wanted to say that those who come from the boat, can suggest easily usable applications (usually the examples of the guide, do not agree with the work).
I had the opportunity to follow some boys out of the courses of the "house of charity arts and crafts" that have taken courses of 300 hours and I must say that they were well prepared... if you are looking for information on the internet. Then I suggest an internship in a company.

Hi.

 

[Mark87g]

http://www.casadicarita.org/it/cors...gorie_tid=all&field_corso_sede_nid=all&title=I've done a research based on your advice and found the following things. I also sent an email and hope they answer me so that I know what course they are now actually active and what not. that you know is a problem that I am not of pity? Have I read some even free courses? Do you know any additional information? I sent an email and so if I reply I can interlocate myself with them so that they give me more information.

an internship in a company is definitely a great choice but, I wonder: which companies hire? where to send the resume? It is not easy even to find an internship in reality.

 

[gianni55]

mail is fine, but after a few days if you do not receive answer phones (sometimes it is the best solution). I don't think it's for the exclusive use of residents. You have to find someone who's hosting you.
It is usually those who hold courses that find the way to direct students to business internships, this free of charge and without hiring. then if you are both good and lucky, sometimes you can get a project contract with which to start making experience.
It is true that companies take with difficulty but sometimes a valid guy has some chance to work (see that it costs less than a professional) sure that it is not easy, you have to have passion, study hard, be serious, adapt to the difficulties, have spirit of sacrifice, seize opportunities to fly and be lucky. It is no longer the time of the wanted designers, flattered and capricious, now outside there is only a few survive.

Hi.

 

[pritio72]

Hi, gianni, I hook up to the various discussions. I had done the 80h caty course a few years ago and obviously do not become an expert if you do not use it. the course departed from who at least had a 3d base, of course they taught main commands, the various environments and at the end infarination of surfaces. I've been coming for about 9 years of experience with ptc (pro-e) and so I'm all over it. then I used it a few months and then for work reasons I went to s.w. since caia is very used I wanted to make an update on the functions, for what I asked for lumi. in the training center I phoned and wrote more than one email, they answered me but in the end I couldn't talk to any teacher to be able to interface me. then among others have not yet reached the number to form the class. greetings to all

 

[gianni55]

hi pritio, I would say that you don't hook up to the discussion, since you started it, and in fact in part I responded to you about asking information directly to those who hold the course, sin that they don't respond... you should insist and if the course starts, deepen everything. if you have a license on work and time and want, you can keep yourself trained with the various tutorials, consider that some are very valid, I then recommend installing the interactive guide, where besides the explanation of the command there is also the corresponding exercise as catpart, this is very useful. If you need something, ask yourself.

Hi.

 

[Mark87g]

I actually sent an e-mail to that site you told me and they answered me. there is no opportunity (the course was already complete) but the gentleman made available and made me know for another course always torino. Thank you very kind. Let's say that it should be 200 hours of casket that are really many. then it is normal that you have to practice practice practice everyday otherwise then it is useless. the use of the program comes then with the experience. what do you mean? where can you find this guide? I'm taking tutorials from the internet for the moment and going through the same things. However in fact many tutorials are also mute, which is not the maximum.

p.s you know by chance the definition plane command where you can also define an offset. I can't find it at first glance.

 

[gianni55]

the interactive guide consists of files contained in a folder called "doc19" to which you have to bet from options/general/guide/position, this folder recovers from caia installations for industry/university/superiors.
for the command plans, depends on the environment: part design in reference element extended;
Generative shape design in wireframe
faster do this: view/bar tools and check the tools you need

 

[Mark87g]

gianni I went into general options location guide and I have to choose the folder but now I can't find the doc19 folder. would you be more precise in indicating where it is? in the daussault folder there is no doc19 folder, actually.

As for viewing I think it is better to display and put everything in the worksheet space so that you have everything at hand when you need it, correct?

 

[gianni55]

is in the original disks of the installations, or you give it to you.
view everything at first, to practice, then only those icons you use more

 

[Mark87g]

Do you know how to get out of the sketcher when you're in part design and want to see the solid three-dimensionally? that rectangle with the dart to the top that is on the right there is no more, I don't know why. Now to find him, it takes a mess. How can you easily find it? What a mess I'm getting.

 

[gianni55]

the rectangle with the dart does not disappear by itself, you must have changed the toolbar. . .

However to get out of the sketch, you can simply double-click an entity of any 3d, or not to make pastries double-click on one of the top canonical planes in the tree (f3 to make it appear/discover)

if you want to restore the icon, go to view/barre of the stumenti/workbench in use (put the check mark)

Hi.

 

[Mark87g]

Okay, perfect. In fact, it was necessary to get a little drunk. thanks for your kind and punctual message!