choice of material with finishing in multi body

[Onyx68]

Good morning to all,
my question refers to the choice of sheet finishing (type sb or 2b etc) in multi body. in the distinct cutting prop. I find it listed but not specified. I ask where the sheet finishing option should be applied in order to have it already in the cutout? I use the 2020 version. (see Annex)
Thanks

 

[MassiVonWeizen]

at the moment I found only this discussion

SOLIDWORKS Forums

The home for the SOLIDWORKS Forum. REAL People, REAL Experiences, REAL Knowledge.

forum.solidworks.com

 

[Onyx68]

I found two ways: a suggested version by the newmacut assistance. one and to add in the prop welds the finishing voice. then opening separate cut of my code remains the finishing row then inserting by hand 2b, sb. etc. in the box next door. which then in the separate cutting table in the tav 2d recall and save with a column type sheet. this and what they have indicated to me. I'll give you some experience and I'll confirm if it works.
my need and have the right material for each sheet with the specifications in the single element listed in T. 2d. so if in the multi-body I have more sheets of various thicknesses and different finishings this must report it in T.2d. in the cutting table.

 

[MassiVonWeizen]

what tells you to add the property is the one suggested in the discussion that I indicated and you do it through the tab builder exactly how you insert vle file properties.
what I suggest, however, does not explain where the sw-treatment variable derives, moreover it is also editable the existing one so adding another is superfluous with their method

 

[Onyx68]

I do not consider manual compilation very feasible. i.e. to insert in the prop. surface treatment from the distinct properties of cutting as the method is prepared to forget. I am evaluating another more "automatic" way so as not to add texts inserted manually. Then I will give judgment.

 

[MassiVonWeizen]

I do not consider manual compilation very feasible.

bhé what you explain in post #3 is a manual compilation; by the way, in that post, you talk about two modes, but just explain one.
the way to avoid errors is to select the sheet and specify the finish i.e. change the surface sw-treatment value. where is it managed? this should know how to say assistance

 

[Onyx68]

I do not declare myself yet before I have verified the theory. I will return to the subject if the method becomes feasible.

 

[MassiVonWeizen]

@onyx68 Do you have any news?