cilindro con scanso

[M.Loris]

Good day to all,

My name is loris and I am new to the forum and I am at the beginning with the cad.

I contact you to ask for help on how to make a part of a drawing, attach photos of the cylinder here you want to draw.

the inner and outer shape I drew what I can't draw is that groove that you see under the cylinder, there is someone who can explain how I can achieve it?

 

[cacciatorino]

What are you using?

 

[M.Loris]

autocad 2010

 

[cacciatorino]

autocad 2010

Then you'd better ask the question in the special section, you'd be lucky enough. Then it would be better to upload a clearer photo, because in the present one you understand quite little because it is too dark.
http://www.cad3d.it/forum1/forumdisplay.php?37-autocad

 

[M.Loris]

Okay.

Since these are the first steps in this forum, would you tell me what would be the most appropriate section?
Thank you.

 

[gerod]

discussion moved in correct section
Hi.

 

[xxfast]

I think you should use this technique.
find everything on the autocad guide.
View attachment Filmato_0001.rar

 

[M.Loris]

Hello xxfast,

you could give me the address or name of the article or change video format because as I got the message I don't find the video.

Thank you.

 

[GP.]

that of xxfast is a compressed file, to download and decompress.

However, basically, you have to create a solid (correspondent to the groove) to be removed from the cylinder.

 

[xxfast]

exact gp.
I didn't have time, I was running and I did something on the fly. :redface:
m.loris the video downloads it, decomprides it and you see it, but the concept is the same.

 

[M.Loris]

Hello.

I apologize for insistence also because I think you have more important to do, however when you are inizzi it is all complicated.

I wanted to see if I understood the procedure.

first design the shape of the "scanso" then neck the rectangle?

 

[xxfast]

Excuse me if I allow myself.
If you need to use autocad for other jobs, maybe you should take a course?
Three-dimensional modeling is quite complicated, you should have at least the basics.

 

[M.Loris]

Good evening,

I managed to create the scan thanks to the video posted, now if I can ask what the command to empty the inside of the cylinder?

 

[doking]

the command empties inside the solid modification blade

 

[M.Loris]

Hello.

I had already tried with that command but no I find the right sequence because nothing happens to me, is it that by chance he could describe the landscapes?

 

[doking]

first select the solid, select the faces you want not to interest from the emptying then from the quota of the walls you want to get and in the end, if it needs.