cinematismo piano

[AngeloB]

Hello, everyone.
I use lt2007 and wanted to ask for clarification regarding autocad mechanical 2010.
being autocad 2010 parametric. I ask you if you can simulate a flat cinematism (in 2d)
ex. hò design 2d of crank, piston, biella. the profiles are right and I do not want to parameterize them, but I put together piston, crank and biella, check the constraints (parallelism, concentricity etc.) and making move the handle, biella and piston move accordingly. and possible?
Does the piston, for example, have to be turned into a block or into a group?

 

[GiGa]

right now I have tried the movement of a pantograph leverism (formed by blocks) and it works smoothly.. .

 

[AngeloB]

this is an infomazione that I am very helpful
but the interface of autocad2010 can be also the traditional one or it is necessary to adapt to the new "office" type interchange?

Thank you.

 

[GiGa]

The interface can be the classic one, but I would recommend you try the ribbon...
Finally after a few months, I'm working with 2010 and, apart from the initial difficulty of finding some commands, I'm not at all ill... Also because working with inventor 2010, I got used to it immediately (and in inventor I would not return to the "classic").
now, having autocad many more commands, work with the ribbon and a series of toolbars with the commands for which I do not use the keyboard and that are not present in the ribbons.

 

[AngeloB]

I am still standing at xp professional and there is a 19" monitor
seems to me that with the new interface remains little space to draw