color difference between display and print

[Dinosaur]

Save to all, I hope that someone can give me clarification on the fact that in the display the renders faithfully reproduce the materials and characteristics of them, while the prints of them are decidedly staggered above all at chromatic level, despite using machines and materials of good quality.
Now I don't know if this is due to some of my incorrect setting, or the calibration between the components and in the latter case there are ways to match the result between the two products?

 

[Tequila]

more than anything else try to put some hardware specifics you use because so to feeling it is difficult to give you help.

 

[Dinosaur]

Sorry! I unintentionally neglected: computer of - intel xeon 2.27ghz 2processors; ram 12 gb; video card nvidia picture fx 1800; so win 7 professional 64bit;monitor lcd
p2310h , philips 200wb; infotec isc printer 2525 laser colors; hp plotter designjet 500 plus 42;

 

[PlannerRoad]

....plotter hp designjet 500 plus 42;

the 800 series driver has in the printer preferences options the "printed color control" with "no color correction" to set.
without that settling come the false colors.
500 and 800 drivers should be the same.
then depends on the used version of the drivers.

 

[Dinosaur]

Sorry if you abuse your time but I didn't grab if you meant for the drivers of the plotter, and if yes while you searched I don't find the voice "color control", I'd be grateful if I indicated where to find it, of course this also applies to when I mold with the laser. Thank you.

 

[PlannerRoad]

Sorry if you abuse your time but I didn't grab if you meant for the drivers of the plotter, and if yes while you searched I don't find the voice "color control", I'd be grateful if I indicated where to find it, of course this also applies to when I mold with the laser. Thank you.

Yes, I meant in the preferences of the drivers of the plotter.
evidently in your driver version that option is not there.
in the 800 that I have is in the "color" tab.
the drivers between the 500 and 800 series are the same from what I remember, but the most dated versions (I use the first version, as I think it is the best, the later versions gave me memory problems in the printing phase) are different from the last, I do not remember now the interface.

 

[Dinosaur]

thanks for the indication that it allows me to identify however where the problem is and try to remedy it.