come va cimatron e?

[cimaguy]

mah, personally I never met big problems in the fittings.

I happen to have situations where the command failed because the edges

were not closed well or there were "tolerant" geometries at certain points....

but you should see the specific case because, according to me, if the command

It doesn't work, almost certainly there's a problem on geometries to correct

before you fillet.

 

[Dylan]

mah, personally I never met big problems in the fittings.

.

!!! ! !

:biggrin:

I see to post something.. .

Well, surfers can have problems. But I have to do the same fillets and often on maths coming from the outside. modify, correct, etc. is dangerous either ever changing something in geometries (of style, not mechanical ..) then, after fresato, the customer who says?

dylan

 

[stinit]

mah, personally I never met big problems in the fittings.

I happen to have situations where the command failed because the edges

were not closed well or there were "tolerant" geometries at certain points....

but you should see the specific case because, according to me, if the command

It doesn't work, almost certainly there's a problem on geometries to correct

before you fillet.

I agree...when I model sculpted objects (with unformed surfaces and cc) I know something...when he does not make the connection is because "physical" does not succeed...then you have to recheck the object. . .

then there are software like catia and solidworks that also collect the impossible... :redface: ...but the point is every cad has its strengths and weaknesses. . .

 

[monster]

then there are software like catia and solidworks that also collect the impossible... ...but the point is every cad has its strengths and weaknesses. . .

.... in time..... in time...... .


I've never had a problem with fittings for the moment if we talk about geometries where the system doesn't do them because at that point you can't or as I saw them but with superficial error loops so much to show you are a donkey and you can't distinguish reality from "virtualization"

time ago I sent a cam file to dylan to show that the system knows where it has its problems to run a command... based on the milled diameter and fittings of solid or surface

I believe that all those who make mold closures know problems from the passage from one surface to another and as such to manage! ! ! !

the problems can be many I... in the small me I've always got it.... I've been able to manage fundamental closures so that I'm fried both on one side (fixed) and on the other (mobile) in all respect, to have also a reliable cam.... although in most times it's not so...

I would say that I really do files with these problems... or controls issues, really show if we're the ones that are wrong or if it's really the top that shits! ! !

I leave you for two weeks, I wish you good holiday deserved to all!!! !

 

[stinit]

.... in time..... in time...... .


I've never had a problem with fittings for the moment if we talk about geometries where the system doesn't do them because at that point you can't or as I saw them but with superficial error loops so much to show you are a donkey and you can't distinguish reality from "virtualization"

time ago I sent a cam file to dylan to show that the system knows where it has its problems to run a command... based on the milled diameter and fittings of solid or surface

I believe that all those who make mold closures know problems from the passage from one surface to another and as such to manage! ! ! !

the problems can be many I... in the small me I've always got it.... I've been able to manage fundamental closures so that I'm fried both on one side (fixed) and on the other (mobile) in all respect, to have also a reliable cam.... although in most times it's not so...

I would say that I really do files with these problems... or controls issues, really show if we're the ones that are wrong or if it's really the top that shits! ! !

I leave you for two weeks, I wish you good holiday deserved to all!!! !

you are right about the fact that those who make mould openings must necessarily solve problems of connection between surfaces. .

the point is starting from a good modeling. . It seems trivial but it is. ..especially if the model is used to make a mold...condition in which you have to identify (first) the mold opening edges and its shape and then collect everything...

It often happens that you can create areas where the deform goes to complicate the surfaces...then it is not simple...it takes a little experience:wink: ...

 

[tomas]

I use toptron since it was it....and now I use toptron e9....according to me is a great software.
I am of the idea that every program has its pros and its cons....the only way is to take its own models go to various dealers and get you to do tests....only you can understand what is the most suitable for yourself....
greetings tomas.

 

[tecnicoDD]

I use toptron since it was it....and now I use toptron e9....according to me is a great software.
I am of the idea that every program has its pros and its cons....the only way is to take its own models go to various dealers and get you to do tests....only you can understand what is the most suitable for yourself....
greetings tomas.

Hello to all I am new in this forum.
I fully agree with tomas, in pio opinion is that the advantage of toptron is the fact that with a single software we go from design, modeling to table and cam (a single program that does a bit of everything and well integrated with varo modules).
a record on who tried to install it on notebooks: I did some installation tests on fixed pcs of various characteristics and the problem that once started toptron (in my case e9) I tried to open in files and closed everything, was due to the video card.
pel my experience, I recommend as minimum performance repentum 4 2gbram and nvidia video card with at least 512mb ram (I saw that it also turns with gforce6200 128mbram, but it is extremely slow).
hello to all

 

[massimo gallina76]

hello to everyone, do I know how to give indications about this error in the opening of summit?
I press that I use version 14.....

Thank you.

 

[TECNOMODEL]

hello to everyone, do I know how to give indications about this error in the opening of summit?
I press that I use version 14.....

Thank you.View attachment 61412

never seen such a mistake, among the many problems that gives toptron.
What does assistance say?

 

[massimo gallina76]

never seen such a mistake, among the many problems that gives toptron.
What does assistance say?

I am no longer in assistance...... now I use visi...... but for some command step on toptron

 

[TECNOMODEL]

I am no longer in assistance...... now I use visi...... but for some command step on toptron

from good bad software what is toptron sometimes just restart it, or restart the pc.
Try not to harm