compensation for rendering tips

[Tristus]

a make-up to make our mirror ... "more' mirror" could be to build a solid and, playing with the value of chamfer, bevel the sides to make it a smooth mirror. the mirror material applied to the solid molated (molation that can be more or less wide) contributes to the "spect" effect. this if the simple plane on which the mirror material should not satisfy us, or if, due to the illumination chosen for that particular view, the mirror did not come to create those reflections that often help us.

also build a small frame, or even simple braids.
a plane alone, if there are no reflections that help, it does not help to the mirror effect. Considering that we're not talking about solid complex, it's worth dedicating a few more minutes to enrich the scene with a slightly more elaborate mirror of a simple plane or a simple parallelepipedo

 

[Tristus]

in the first photo (bath concept)

1) the floor of the bidet is perhaps too sharp. The part where my butt rests seems too tight.

2) I would personally give a bit of thickness to the mirror and make it of the bald type, with 4 steel clips in half of each side, so as to obtain more mirror effect

3) the towel over the bidet is fine, but those under the sink are too regular. even if bent to perfection, being made of thick sponge, they always have some small deformation. personally, as well as lightly deforming those solids, I would also add some displacement to the material you used for towels. Those solids under the sink do not have the typical sponge effect of towels. (always if those under the sink are towels, but it seems like yes)

4) the floor... But there's a matter of taste. apart from the color (I would go with the classic wood color) perhaps by dripping the tiling applied to the material, it would be better. I don't know, they personally give me the idea of the board. too big. But I repeat, there's a matter of taste. But sometimes, to make the scene as realistic as possible, it is necessary to make compromises between our personal taste and the need to have a realistic scene.


in the second photo
The chair is well made. Maybe the floor doesn't make him justice. But it's good.

 

[Tristus]

One last thing: a power outlet... for a hairdryer, an electric razor... I would add a warm light bulb. It's not essential, but it could help me with the mirror effect.

 

[Onyx68]

in the first photo (bath concept)

1) the floor of the bidet is perhaps too sharp. The part where my butt rests seems too tight.

2) I would personally give a bit of thickness to the mirror and make it of the bald type, with 4 steel clips in half of each side, so as to obtain more mirror effect

3) the towel over the bidet is fine, but those under the sink are too regular. even if bent to perfection, being made of thick sponge, they always have some small deformation. personally, as well as lightly deforming those solids, I would also add some displacement to the material you used for towels. Those solids under the sink do not have the typical sponge effect of towels. (always if those under the sink are towels, but it seems like yes)

4) the floor... But there's a matter of taste. apart from the color (I would go with the classic wood color) perhaps by dripping the tiling applied to the material, it would be better. I don't know, they personally give me the idea of the board. too big. But I repeat, there's a matter of taste. But sometimes, to make the scene as realistic as possible, it is necessary to make compromises between our personal taste and the need to have a realistic scene.


in the second photo
The chair is well made. Maybe the floor doesn't make him justice. But it's good.

finally target user and reference answers. I often observe without commenting and you are usually "justified" with so many controversies. instead of having an answer to the question. and of course there are experts, technicians and even those who manage licenses and more... but you do not have the good conduct to answer if you have something to say constructively and not to polemize and to put in corner the person who sometimes very young, sometimes inexperienced, sometimes just curious.. In short, users enter this blog for answers not for a judge and supreme god... you could use soft tones .. serene? thanks to the user of the answer.. .

 

[MassiVonWeizen]

la first answer who was given was courteous and professional. up first against reply She was rude and arrogant. the groove of behavior traced him himself.
the fact that you post photos without taking part in the discussion constructively is the antithesis of a forum (it is not a blog). but this is a common practice, to abandon the discussions, without continuing to the answers received giving a public utility to those who will have the same problem.
Moreover it seems that many of those who ask for help, even with numerous posts on the shoulders, do not have any technical competence since they simply ask without making any contribution in one of the many fields of which the forum is composed.
u you are a mechanical carpentry designer and often observe why do not bring your expertise?

 

[Tristus]

finally target user and reference answers. I often observe without commenting and you are usually "justified" with so many controversies. instead of having an answer to the question. and of course there are experts, technicians and even those who manage licenses and more... but you do not have the good conduct to answer if you have something to say constructively and not to polemize and to put in corner the person who sometimes very young, sometimes inexperienced, sometimes just curious.. In short, users enter this blog for answers not for a judge and supreme god... you could use soft tones .. serene? thanks to the user of the answer.. .

I think no one wanted to attack alukino, and the very first answer he got... It wasn't the most "accordid." simply it was answered with cold pragmatism, that is that the photorealistic rendering (especially that of interior) is not easy and needs so much experience. This concept that alukino should have "digested" with more tranquility.
That said, those who propose their own work also do so to obtain constructive criticism, but it must also be open to criticism, because if constructive they help a lot.

the best schools where to train (both piloting or architecture schools) are those full of "rompiscatole" that spray your works by catching that hair in the egg that you would spend etc etc. All this contributes to final training.

 

[Tristus]

Today I want to get a little peeked with alukino rendering.

It's true that the container cap above the sink can be quite similar to the furniture, but personally I would have done it red and I would have changed the plastic color of that container a little bit. wanting also a semi-transparent plastic that lets glimpse a little the level of the liquid it contains. this just not to make the image too chromatically monotonous.

the 2 cubes above the canteens I would have removed them immediately. because if it is true that I imagine (i.e. it is the 2 light sources that project the light upwards) as well as unnecessarily bulky, constitute a danger, being too close to the sink. But it's likely they're containers, you don't understand.

I would have added a small skylight over the mirror. a skylight mirror, maybe with spotlights. I would have moved the towel from behind the bidet and placed next door. put a little distracted on that bidet and, after washing, look for the towel while still sitting. If he wasn't careful at first he'll panic. towels should always be placed in view.
the bidet soap box seems to me little deep. That's a soap that's meant to splash away at the first touch a little distracted.

Finally, a bathrobe hanging on the bathrobe door that is on the right, to further enrich the scene.

for the rest, I saw the other renderings, and all in all I'm not bad. sometimes you run too much and you don't want to waste time in the details even minutes, which at the end of the accounts are those that contribute to the good rendering.

 

[alukino]

Damn it! Then I'm not just the one who doesn't see the mirror effect.... at first I thought it was a problem of my display....I'm not an expert to make but there's still a lot to do.... praiseworthy the tenacity of the boy.... on other portals dedicated to making you are making that you do not understand where the boundary between photographic reality and illusion and very thin.

I answer to the 2 shocked by the mirror (I want to see photos below) different tiles therefore nn and the same as colors but at least we will solve the mystery of the different wall in the mirror
a yes this rendering is not mine but the bathroom and the same therefore at least the mystery of the mirror has been solved
it wasn't a cmq error

 

[alukino]

you blur the photos because you can't seize the messages between the lines that are sent to invite you to change the log.

But you think you're funny?
I'm very serious maybe you don't even know what I'm talking about and something that automatically does the forum (whatsap type) and you're saying crap but you're serious please
if the photo that I load weight 9 mega (original) I close it because impossible cmq to load. After uploaded to this page you reload and weigh half mega....... magic really exists but for pleasure.

I just wanted to point out the difference from this photo I posted and the same photo displayed by this linkhttps://ibb.co/jrg0xkr

 

[exxon]

Ah, it's because you lighten them, now I understand.

so the originals are even more beautiful than these... sin that the site does not allow you to load those from "9 mega".

 

[alukino]

I understood the concept very well
bad navigational rendering, to teach @ alukino how the world of today goes in rendering,vr and beautiful company
you have wrong example

eee safe cmq a 2 months ago I learned to do these but I prefer to use areal engine

 

[alukino]

Ah, it's because you lighten them, now I understand.

so the originals are even more beautiful than these... sin that the site does not allow you to load those from "9 mega".

ahahah more or less cmq I am saying if from 9 I have to reduce them to 4 or 5 the site after in turn reduces them to 1-2

 

[alukino]

Can I ask you what studies and what class do you frequent?

I do not study and I do not attend any class now and nn I did schools that come in with graphic rendering art.... I learned from myself in a couple of months from you tube...... then by pure case to mma I knew the parent of my training companion who designed rendering for work, gave me a 2 free straights and was very kind (and difference of others.........) and renderings are very improved

 

[alukino]

la first answer who was given was courteous and professional. up first against reply She was rude and arrogant. the groove of behavior traced him himself.
the fact that you post photos without taking part in the discussion constructively is the antithesis of a forum (it is not a blog). but this is a common practice, to abandon the discussions, without continuing to the answers received giving a public utility to those who will have the same problem.
Moreover it seems that many of those who ask for help, even with numerous posts on the shoulders, do not have any technical competence since they simply ask without making any contribution in one of the many fields of which the forum is composed.
u you are a mechanical carpentry designer and often observe why do not bring your expertise?

Did you write the same message I don't even know how many times but a little fancy or do you just copy paste?
cmq I had altered in the first pages because without evidence I was accused of certain things.
It is very simple here if we do not have certain evidence of one thing we must not even open the argument in my opinion.

 

[exxon]

....I learned alone in a couple of months from you tube.... .

Wow, so good in just two months? undoubtedly you have a learning speed that is out of the ordinary. Have you ever thought about anything else? I know, astrophysics, or quantum mechanics. I don't think in two months you can learn everything, but maybe in three or four...

 

[alukino]

Wow, so good in just two months? undoubtedly you have a learning speed that is out of the ordinary. Have you ever thought about anything else? I know, astrophysics, or quantum mechanics.
I don't think in two months you can learn everything, but maybe in three or four...

sympathetic cmq that I have to tell you and so for areal engine I have put 2 months even less, amounts things from sketchup or 3ds max copi septaggi from a 2 video of you tube then readatti according to the rendering nn I see difficult

 

[Tristus]

sympathetic cmq that I have to tell you and so for areal engine I have put 2 months even less, amounts things from sketchup or 3ds max copi septaggi from a 2 video of you tube then readatti according to the rendering nn I see difficult

leaving convinced and safe is always a good thing. However, alukino, in this field there is always something to learn.

 

[alukino]

Latest jobs

 

[Biggmetals]

I am not an expert but since posts on the forum accept my criticism.
in both jobs the corners are too hard and net = I do not see realism in these photos.

First rendering:
What's going on with the "spec"? looks like a lcd or monitor that's undergoing the effects of thanos snap. (take it on laughing)
the textures are repeated, even the veins of the wood and you notice.
battescopa? you pass from wood to wall without even an inaccuracies, too fake.
I doubt that the veining of the wood follows the rise of the steps.

Second:
too much and too much reflex of the bed, there seems to be another out.
covers too much the balcony, of which nothing can be seen (then how do you get out on that balcony? there is no window doors)
same speech for battescopa or otherwise net edges
the floor lamp to which socket is attached?
the lamp from the dubito ceiling can be connected so: I would have hidden the attack by putting it a little more towards the frame

ps: aren't there too many lamps in such a room illuminated by the window?

 

[Biggmetals]

sorry double post, but I also follow forums only of 3d artists and force to carp information you understand where to go to look.
do not take what I say as docet, absolutely. take it as critical (right since you place on a forum and receive opinions) and improved.

congratulations anyway if you say you're doing everything by self-taught