cosmos

[enrico pisanu]

Hey, guys.
I wanted to ask for advice. I try to simulate on cosmos a piece but it gives me this notice that I can't understand. Can any of you tell me what that means?
thanks to all

 

[ballino]

never seen such a mistake,

try to attach the profile that generates the beam.

"Well times when there was only the geostar... "

 

[enrico pisanu]

hi is a reticular profile of a frame built with structural elements.

 

[ballino]

Hi.
if you want a hand try to post the file because from your "fast response" I can not give you a hand and then it is not centered on what I suggested to you
(profiles).

dancer

 

[enrico pisanu]

You're right. but the profile that generates the beams is made by 2 concentric circles. I built a custom library with the tube section I used. I can also tell you that the diameter is 25.4 mm for a tube thickness of 1.65 mm. Let me know if that's what you meant.

 

[ballino]

Last round...

I give you a profile made by the basic bookshop.
accept it as it is and completes the function of a structural member.

eventually change it with your diameter and thickness

dancer

 

[ballino]

I know this thread is more suitable for this discussion
http://www.cad3d.it/forum1/forumdisplay.php?f=90