cost design of a mold for pipe fittings in pvc

[Simon1]

Hello.

my name is simon, I am a student(engineering automation), I would have a question regarding the cost of design and the realization of a mold for fittings of pipes in pvc, in a few words what would be the price of a mold like that? and what are the factors that change the price of the mold?

thank you in advance for those who answer.

 

[SHIREN]

Hello.

my name is simon, I am a student(engineering automation), I would have a question regarding the cost of design and the realization of a mold for fittings of pipes in pvc, in a few words what would be the price of a mold like that? and what are the factors that change the price of the mold?

thank you in advance for those who answer.

Hello simon1
If I'm not wrong you're at your first msg or your first new post
a first presentation would have been appropriate to the forum
however you are welcome in the forum of cad3d.it
the community of Italian designers
that your date and enrich you again

ask the price of a mould for fittings
very delicate
it in 99% of cases is not the consequence of a logical or mathematical analysis
of a set of costs and revenues
but there are variations that change the price in percentages also notable
However if you could attach a drawing or even a manual sketch
we could begin to establish more precise parameters
Waiting
Thank you very much

 

[Simon1]

Thank you for responding so fast.

then the diameter of the fitting for the mold is 200mm, the doubts are:
the cost, approximately, of the design of the mold and the realization and mechanical processing of the same from a specialized company.

Thanks again

 

[SHIREN]

Thank you for responding so fast.

then the diameter of the fitting for the mold is 200mm, the doubts are:
the cost, approximately, of the design of the mold and the realization and mechanical processing of the same from a specialized company.

Thanks again

then we are talking about medium sized large molds
pipe with internal diameter 200 mm
if you calculate the encumbrance perhaps a lightning rod
696 x 696 with matrice thicknesses and 150mm punch six at the limit
Try to get a quote for such a flash drive
and we also expect other opinions
Thank you very much

 

[IPdesign]

Good morning simon.
In the past, I have designed some of those molds, too, to provide an estimate I doubt that someone can be so unproven to do so in a public forum.
the components in play are numerous, let's see if I can mess up even more ideas.

the only firm point you put is the size of the object.
I do not think that this is the case.
* material to print
* no prints of the mould
* annual printed number
* life cycle in mold years
* stamping cycle (printed no./hour)
* geometry to print
Do you have any substations?
What kind are they?
* Needs movement?
When are the movements long?
* Can a mold be enough in open/close with trolleys?
* or do you need a type in 3rd plate?
* Should movements move mechanically or with hydraulic pistons?
* is mounted on vertical or horizontal press?
* on which press is the mounting on?
* has the injection point already been identified?
* injection with hot nozzle or casting channel?
* if hot nozzle and in case of multi footprint, nozzle with filling or not?
* the detail to be printed has areas with threads that need unscrewing ?
* in this case, is it necessary to move with a hydraulic motor or by a patron?
* Should the frame be made of aluminium or steel with thermal treatments?
* should the printers be included?
* should inserts for interchangeable mark be provided?
* must the mold be versionable?
* with version changes in the car?

I stop here but there would be at least as many points to ask the client before leaving only with the estimate of project costs/production mold