cost systems

[Paulì_zx]

hi guys, I wanted to ask you a general question about the costs of the cads currently most used around, I think about catia, nx, solid works, solid edge, proe, inventor, rhinoceros, think3 and others that I may not even know.
Of course I would like to know a gross figure, nothing specific.

Hi.

 

[cacciatorino]

hi guys, I wanted to ask you a general question about the costs of the cads currently most used around, I think about catia, nx, solid works, solid edge, proe, inventor, rhinoceros, think3 and others that I may not even know.
Of course I would like to know a gross figure, nothing specific.

Hi.

to list the average-end cads turn on 6-7000 euros (parlando di se, swx, etc), those of top band (catia, ug) starting from 10.000, and to climb according to the modules chosen.
separate speech for pro/e, whose basic version starts from about 6000 but then is strongly scalable upwards.

However of these times I hear about admirable discounts compared to official lists.

 

[enri]

rhino costs less than a thousand euros, the others from six thousand up.... :
we posted at the same time. ..however I had seen that even nx had a basic version around six thousand.

 

[Paulì_zx]

while regarding ansys type simulation programs?

 

[Zanna91]

while regarding ansys type simulation programs?

the cost of the professional license or the basic license should be about 30000 euros.

 

[enri]

the cost of the professional license or the basic license should be about 30000 euros.

Nasty! scherzi?

 

[cacciatorino]

while regarding ansys type simulation programs?

I think from 10,000 and then climb up to 70 to 100,000 with all modules

 

[Paulì_zx]

...another information. ..the purchase of the license is personal, ie if I more than one computer on which to want to run these programs... how does it work? should I buy more licenses?

 

[Zanna91]

Nasty! scherzi?

Unfortunately, no, the cost of the license in my opinion is very high. :frown:

 

[cacciatorino]

...another information. ..the purchase of the license is personal, ie if I more than one computer on which to want to run these programs... how does it work? should I buy more licenses?

you have so many licenses for how many uses contemporanee You want to have it.
I'll explain better.
if you have two pcs (e.g. fixed and portable) but you only use one at a time, you just need a license, which you will move from time to time on the pc you are using at that time. If you have two pcs and use one of you and the other your partner, both at the same time, then you need two licenses.

 

[bio]

Nasty! scherzi?

cfx full optional with icem and 1 license per package (1 cpu of course) stands above 70k..

very specialized procast/magma programs are around 100k..

bio