create opening - wall with tilted profile

[Stefano.bp]

Good evening...after reading countless conversations between which I thought you could help me, and after losing two in vain nights. I agree that the question will probably be trivial, and I ask you for help with the following question:

how can I create a simple opening that holes the two walls at the same time?
the straight wall is a 15 cm std wall, the "zeppa" is a local model - wall and the two elements are united.
I'm amazed that I can't select a wall created in place (this section variable) as a host to house a rectangular opening, what's wrong?
Thank you in advance.

 

[Stefano.bp]

I just want to add, that I also tried to insert the door that appears in the figure, and also this size only the wall straight.
I also assured myself that the vacuum of the family door was quite extended by opening the family and extending the vacuum volume that cuts the wall host.
Thank you.

 

[Stefano.bp]

I read a lot of stuff from another forum... I feel like I realized that the wall component molded in-place doesn't fit with a wall opening, even if the two walls are united... .
Thank you.

 

[Stefano.bp]

... I thought that the user of this discussion had done like me..
http://www.cad3d.it/forum1/showthread.php?t=12391&highlight=taglio

 

[gfrank]

I read a lot of stuff from another forum... I feel like I realized that the wall component molded in-place doesn't fit with a wall opening, even if the two walls are united... .
Thank you.

... just like that...

 

[gfrank]

I read a lot of stuff from another forum... I feel like I realized that the wall component molded in-place doesn't fit with a wall opening, even if the two walls are united... .
Thank you.

to cut it from the window, you have to do the "zeppa" with a wall extrusion (with profile = to the wedge)

 

[Stefano.bp]

Thank you very much.
but I wonder, the user of this discussion:http://www.cad3d.it/forum1/showthread.php?t=12391&highlight=taglioas it did to make the wall for the tilted part, to better tell to integrate the tilted part and make it part of the wall stratigraphy.
Did you apply the retino only in the section view?
Say hi.

 

[giusepperocca]

... just like that...

just so exact

 

[gfrank]

Thank you very much.
but I wonder, the user of this discussion:http://www.cad3d.it/forum1/showthread.php?t=12391&highlight=taglioas it did to make the wall for the tilted part, to better tell to integrate the tilted part and make it part of the wall stratigraphy.
Did you apply the retino only in the section view?
Say hi.

in my opinion he created a place wall (component> local model>muro>...), and assigned to the same a material equal to the outer layer of the first wall.
then placed the lock (in the example the door) on one of the two walls, and inserted an opening (empty family) in the second wall of the dimensions equal to the compartment

 

[Stefano.bp]

Thank you, I'll try!
I was interested in that the wall portion created as a place model could have as in the example that I brought you the sampling of the std wall part to which it is joined.

 

[gfrank]

... precisely, just assign to the wall created in place (mediate: component> local model> ...), the same material of the wall (or layer of the wall) standard to which it is joined ...